Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

Creating Zone Sets

Use zone sets page to group one or more zones and reference them in the global firewall group.

A zone set is a grouping of one or more zones in a network to regulate and secure traffic through the security platform running Junos OS. With the zone-based security, you can define multiple security zones, group similar interfaces, and apply the same policies to the zones to avoid creating multiple policies across every possible interface.

Zone sets are referenced in the global firewall group to provide you with the flexibility to perform actions on traffic without the restrictions of zone specifications.

Before You Begin

Procedure

To configure a zone set:

  1. Select Configure > Shared Objects > Zone Sets.
  2. Click the + icon.
  3. Complete the configuration according to the guidelines provided in the Table 279.
  4. Click OK.

A new zone set with the predefined configurations is created. You can use this zone set in firewall policy.

Table 279: Zone Set Settings

Settings

Guidelines

Name

Enter a unique name for the zone set that begins with alphanumeric characters. Colons, periods, slashes, dashes, and underscores are allowed. The maximum length is 63 characters.

Description

Enter a description for the zone set; maximum length is 1024 characters.

Zones

Select one or more predefined or unique zones from the Available column for inclusion in the zone set. For example: DMZ, junos-host.

The unique zones and predefined zones on your firewall depend on the device managed by Security Director.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit