Viewing VPC or Projects Details
To view the complete details of a VPC or a project:
- Select Administration > Policy Enforcer > Connectors.
The Connectors page appears.
- Select the connector you want to edit , and then click
the pencil icon.
The Edit Connector page appears displaying the same options that were used to create a new connector.
- In the Network Details section, get a detailed view by
hovering over the VPC or project name and click the Detailed View
icon before the VPC or project name.
The Detailed View page appears, as shown in Figure 1.
Table 1 explains fields on the Detailed View page.
Table 1: Fields on the Detailed View Page
Specifies name of a VPC or project.
Specifies the site to which the VPC or project s allocated.
Specifies the connector type. For example, virtual network for Contrails and AvailabilityZone for AWS.
Specifies the IP Address Management (IPAM) subnets allocated to the respective VPC or project.
Specifies the group of subnets allocated to the VPC or project.
For Contrail, you will see a key value of Tier. For example, the group is called web and assigned subnet is x.x.x.x/xx. For AWS, you will see only the group of subnets.
For Contrail, they are still group of subnets. However, each of the subnets are allocated to a tag, for example, database, tier, application, and so on.