Help Center User GuideGetting StartedFAQRelease Notes
User Guide
Getting Started
Release Notes

Creating Content Filtering Profiles

Use the Unified Threat Management (UTM) policy page to configure content filtering profiles.

Content filtering blocks or permits certain types of traffic based on the MIME type, file extension, and protocol command. The content filter controls file transfers across the device by checking traffic against configured filter lists.

Note The content filter profile evaluates traffic before all other UTM profiles, except Web Filtering. Therefore, if traffic meets criteria configured in the content filter, the content filter acts first upon this traffic.

You can configure the following types of content filters:

Note If a protocol command appears on both the permit list and the block list, the command is permitted.

Before You Begin


To create a content filtering profile:

  1. Select Configur > UTM Policy > Content Filtering Profiles.
  2. Click the + icon to create a new content filtering profile.
  3. Complete the configuration according to the guidelines provided in Table 216.
  4. Click Finish. A content filtering profile is created that can be associated with an UTM policy.

Table 216: Content Filtering Profile Settings



General Information


Enter a unique name for the content filtering profile that is a string of alphanumeric characters, colons, periods, dashes, and underscores. No spaces are allowed and the maximum length is 29 characters.


Enter a description for the content filtering profile; maximum length is 255 characters.

Notification Options


Use the notification options to configure a method of notifying the user when a failure occurs or a virus is detected:

  • Notify Mail Sender—Select this check box if you want to notify the sender.

  • Notification Type—Select the type of notification, Protocol or Message from the drop-down list.

  • Custom Notification Message—Enter a custom notification message.

Protocol Commands


Use content filtering to block specific commands for HTTP, FTP, SMTP, IMAP, and POP3 protocols. Select the following options:

  • Command Block List—Enter the protocol commands to be blocked. Use commas to separate each command.

  • Command Permit List—Enter the protocol commands to be permitted. Use commas to separate each command.

Content Types


Use the content filter to block other types of harmful files that the MIME type or the file extension cannot control.

Block Content Type—Select from the following types of content blocking (supported only for HTTP):

  • Active X

  • Windows executables (.exe)

  • HTTP cookie

  • Java applet

  • ZIP files

File Extensions


Use a file extension list to define a set of file extensions to block over HTTP, FTP, SMTP, IMAP, and POP3.

  • Extension Block List—Enter file extensions to block separated by commas. For example, exe, pdf, js, and so forth.

MIME Types


Use content filtering to block or permit special MIME types over HTTP, FTP, SMTP, IMAP, and POP3 connections. Specify the MIME(s) to be blocked or permitted:

  • MIME Block List—Enter the MIME types you wish to block. Use commas to separate each MIME type.

  • MIME Permit List—Enter the MIME types you wish to permit. Use commas to separate each MIME type.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support