Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

All Hosts Status Details

Use the All Hosts Status page to view the enforcement status of infected hosts feeds. The supported host feeds are custom and Sky ATP.

By default, details for both custom and Sky ATP hosts are shown. You must select the required feed type from the Feed Source column.

Note: To view the All Hosts Status page, you must have the Threat Management privileges or predefined roles enabled.

Procedure

To see the details of all hosts status:

  1. Select Monitor > Threat Prevention > All Hosts Status.

    The All Hosts Status page appears.

  2. Table 42 shows the information provided on the All Hosts Status page.

Table 42: Fields on All Hosts Status Page

Column Name

Description

IP Address

Specifies the IP address of the feed.

MAC Address

Specifies the MAC address of the feed.

Feed Name

Specifies the name of the feed.

Feed Source

Specifies type of the feed source.

Action

Specifies the action of the infected host. For example: Block or Quarantine.

Enforcement Status

Specifies the enforcement status of the infected host.

Switch Name

Specifies the name of the Juniper Networks switch used to monitor the feed.

Interface Name

Specifies the interface on the switch where the user is connected to a network.

Policy Associated

Specifies the name of the associated threat prevention policy.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

PEG Associated

Specifies the Policy Enforcement Group (PEG) associated with the policy.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

Matched Subnet

Specifies the subnet that is added as an endpoint for the PEG.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

Connector Type

Specifies the type of connector used as an enforcement point.

Connector Name

Specifies the name of the connector.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

Endpoint Address Space Type

Specifies the type of endpoints added to a PEG.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

Endpoint Address Space Name

Specifies the name of an endpoint.

This column is not shown by default. Click Show Hide Column and select this field to appear on the All Hosts Status page.

You can click the filter icon to filter the data based on the following fields:

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit