Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Using Device Alarms

    Use this page to view system‐generated alarms. Alarms provide information about the status and the health state of the system. The alarms received from the Junos Space platform are viewed from Security Director. These generated alarms can help you to troubleshoot issues associated with your system.

    Note: On the right side of the banner is a bell-shaped icon called the Notification Center. Clicking this icon reveals lists of the most recent critical alerts and alarms in Security Director. Clicking the View All Alarms or View All Alerts link takes you to the detail page for the respective topic.

    Before You Begin

    • Read the Alerts and Alarms Overview topic.

    • Configure the SRX Series devices to send SNMP traps to the Junos Space platform. The alarms displayed are new alarms based on the SNMP traps received by Security Director.

    • In case of Space cluster, the SNMP target should be the eth0 IP address of all the nodes in Space cluster.

    • The existing alarms prior to SNMP target configuration will not be displayed in Security Director.

    • To view the alarms in Security Director, add the following configuration to the managed SRX Series devices through the CLI:

      set snmp trap-group sdfm version all

      set snmp trap-group sdfm destination-port 10164

      set snmp trap-group sdfm categories authentication

      set snmp trap-group sdfm categories chassis

      set snmp trap-group sdfm categories link

      set snmp trap-group sdfm categories routing

      set snmp trap-group sdfm categories startup

      set snmp trap-group sdfm categories rmon-alarm

      set snmp trap-group sdfm categories vrrp-events

      set snmp trap-group sdfm categories configuration

      set snmp trap-group sdfm categories services

      set snmp trap-group sdfm categories chassis-cluster

      set snmp trap-group sdfm categories sonet-alarms

      set snmp trap-group sdfm targets x.x.x.x (eth0 IP of space)

    • Review the Device Alarms main page for an understanding of existing device alarms. See Device Alarms Main Page Fields for field descriptions.


    Using the Device Alarms Page


    To use the Device Alarms page:

    1. Select Monitor > Alerts & Alarms > Alarms. The Alarms page appears.
    2. Use the guidelines provided in Table 1 to learn about the page.

    Table 1: Generated Alarms

    Action

    Guidelines

    View Alarm Details

    Select the generated alarm and then right click or click More > Detail View.

    Modified: 2017-06-22