Policy Enforcer Log File Locations
The following Policy Enforcer configuration settings files are located under /srv/feeder/etc/log:
Do not edit these files unless instructed by the Juniper Networks Technical Assistance Center (JTAC).
auto_upgrades_log.yml—Internal use only.
config_server_log.yml—Defines the format for the config_server.log file. For example, message and date format and maximum file size.
feeder_cleaner_log.yml—Internal use only.
feed_scheduler_log.yml—Defines the format for the feed_scheduler.log file. For example, message and date format and maximum file size.
feed_server_log.yml— Defines the format for the feed_server.log file. For example, message and date format and maximum file size.
ha_vip_controller_log.yml—Internal use only.
upgrades_cli_log.yml—Internal use only.
The following Policy Enforcer log files are located under /srv/feeder/log. By default, a maximum of 10 files are created for each log file. For example, config_server.log, config_server.log.1, config_server.log.2, etc. After 10 files are created, the oldest file (in this example, config_server.log) is overwritten next.
config_server.log—Contains log messages for the interaction of Security Director with Policy Enforcer.
feed_scheduler.log—Contains log messages for the downloading of feeds.
feed_server.log—Contains log messages for distributing feeds to the SRX Series devices.
The following Policy Enforcer log files are located under /var/log:
prepare_vm.log—Contains information about your Policy Enforcer software installation.
pe_upgrade.log—Contains information about your Policy Software software upgrade.