Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Policy Enforcer Overview

    Policy Enforcer, a component of the Junos Space Security Director user interface, integrates with Sky ATP to provide centralized threat management and monitoring to your software-defined secure network, giving you the ability to combine threat intelligence from different solutions and act on that intelligence from one management point.

    It also automates the enforcement of security policies across the network and quarantines infected endpoints to prevent threats across firewalls and switches. Working with Sky ATP, it protects perimeter-oriented threats as well as threats within the network. For example, if a user downloads a file from the Internet and that file passes through an SRX Series firewall, the file can be sent to the Sky ATP cloud for malware inspection. If the file is determined to be malware, Policy Enforcer identifies the IP address and MAC address of the host that downloaded the file. Based on a user-defined policy, that host can be put into a quarantine VLAN or blocked from accessing the Internet.

    Figure 1 illustrates the flow diagram of Policy Enforcer over a traditional SRX Series configuration.

    Figure 1: Comparing Traditional SRX Customers to Policy Enforcer Customers

    Comparing Traditional SRX Customers
to Policy Enforcer Customers

    Supported Topologies

    Policy Enforcer supports the following topologies:

    • Client to Layer 2 switch to Layer 3 SRX (IRB)

    • Client to Layer 2 switch to Layer 3 switch (IRB)

    • Client to Layer 2/Layer 3 switch (IRB)

    Role-Based Access Control for Threat Management

    The Policy Enforcer must have the following predefined roles or privileges to perform the threat management. Users without these privileges will not see any pages related Policy Enforcer and Sky ATP in Security Director UI.

    Threat Management has the following task groups and tasks:

    • Threat Management Policy

      • Create Threat Management Policy

      • Modify Threat Management Policy

      • Delete Threat Management Policy

    • Dynamic Address Group

      • Create Dynamic Address

      • Modify Dynamic Address

      • Delete Dynamic Address

    To create and view the user roles, select Network Management Platform > Role Based Access Control > User Account.

    Modified: 2018-02-15