Using Guided Setup for Sky ATP with SDSN
Guided Setup is the most efficient way to complete your initial configuration. Locate Guided Setup from the Configuration > Guided Setup > Threat Prevention menu.
The Sky ATP Configuration type you select on the Policy Enforcer Settings page determines the guided setup process. Guided setup provides all the configuration items you need for your chosen type. See Sky ATP Configuration Type Overview for details on each configuration type.
Before you begin the guided setup process, you must enter the IP address and login credentials for the policy enforcer virtual machine on the Policy Enforcer Settings page. If you haven’t yet done that, go to Administration > Policy Enforcer > Settings and enter the necessary information. See Policy Enforcer Settings for more information.
A Sky ATP license and account are needed for all Sky ATP Configuration Types. (Sky ATP with SDSN, Sky ATP, and Cloud Feeds only). If you do not have a Sky ATP license, contact your local sales office or Juniper Networks partner to place an order for a Sky ATP premium or basic license. If you do not have a Sky ATP account, when you configure Sky ATP, you are redirected to the Sky ATP server to create one. Please obtain a license before you try to create a Sky ATP account. Refer to Obtaining a Sky ATP License for instructions on obtaining a Sky ATP license.
There are some concepts you should understand before you begin the configuration. It is recommended you read about them here in advance. Policy Enforcer Configuration Concepts.
The Guided Setup process offers five steps for configuring Sky ATP with SDSN threat prevention. Click Start Setup to begin.
- Secure Fabric—Secure Fabric is a collection
of network devices (switches, routers, firewalls, and other security
devices), used by users or user groups, to which policies for aggregated
threat prevention are applied. Once created, secure fabric is located
under Devices. For secure fabric, the following is configured:
Sites—A site is a collection of network devices participating in threat prevention. Using quick setup, you can create your own site, but note that a device can only belong to one site and you must remove it from the any other site where it is used to use it elsewhere.
Click Add Devices in the Device Name column or in the IP address column to add devices to a site. Using the check boxes in the device list, you should indicate which devices are firewalls or switches. Policy Enforcer needs to know which devices are firewalls so they can be enrolled in Sky ATP realms and receive feed downloads.
Firewall devices are automatically enrolled with Sky ATP as part of this step. No manual enrollment is required.
- Policy Enforcement Group—A policy enforcement
group is a grouping of endpoints ready to receive advance threat prevention
policies. Create a policy enforcement group by adding endpoints (firewalls
and switches) under one common group name and later applying a security
policy to that group. For policy enforcement group, the following
Once configured, policy enforcement groups are located under Configure > Shared Objects. A policy enforcement groups has the following fields:
Name and Description.
Group Type—IP Address, Subnet, or Location
Endpoint—IP addresses included in the group
- Sky ATP Realm— If you have not created
a realm from within your Sky ATP account, you can create and register
it here by clicking the + sign. Once you register a realm, you can
enroll SRX Series devices into the realm. A security realm is a group
identifier for an organization used to restrict access to Web applications.
You can create one or multiple realms. A realm has the following configuration
Username and Password—These are credentials you must provide, obtained through your Sky ATP account.
Realm—This is the name of the realm you are creating.
- Threat Prevention Policy—A threat prevention
policy requires you to create a name for the policy, choose one or
more profile types depending on the type of threat prevention this
policy provides (C&C Server, Infected Host, Malware), and select
a log setting. Once configured, you apply policies to policy enforcement
Once configured, threat prevention policies are located under Configure > Threat Prevention > Policies. A policy has the following fields:
Name and Description.
Profiles—The type of threat this policy manages:
C&C Server (Command and Control Server)—A C&C server is a centralized computer that issues commands to botnets (compromised networks of computers) and receives reports back from them. A C&C profile would provide information on C&C servers that have attempted to contact and compromise hosts on your network. Information such as IP address, threat level, and country of origin are gathered.
Infected Host—An infected host profile would provide information on compromised hosts and their associated threat levels. Host information includes IP address, threat level, blocked status, when the threat was seen, command and control hits, and malware detections.
Malware—A malware profile would provide information on files downloaded by hosts and found to be suspicious based on known signatures or URLs. The filename, file type, signature, date and time of download, download host, URL, and file verdict are gathered.
Logging—All traffic is logged by default. Use the pulldown to narrow the types of traffic to be logged.
Group—Once your policy is created, it is applied to the policy enforcement group.
- Geo IP—Geo IP refers to the method of
locating a computer terminal's geographic location by identifying
that terminal's IP address. A Geo IP feed is an up-to-date mapping
of IP addresses to geographical regions. By mapping IP address to
the sources of attack traffic, geographic regions of origin can be
determined, giving you the ability to filter traffic to and from specific
locations in the world. For Geo IP, you configure the following:
Name and Description
Countries—Select the check box beside the countries in the Available list and click the > icon to move them to the Selected list. The countries in the Selected list will be included in the policy and action will be taken according to their threat level.
Block Traffic—Choose what traffic to block from the selected countries. Incoming traffic, Outgoing traffic, or Incoming and Outgoing traffic.
- The last page is a summary of the items you have configured using quick setup. Click OK to be taken to the Policies page under Configure > Threat Prevention > Policies and your policy is listed there.
- You must update to apply your new or edited policy configuration. Clicking the Ready to Update link takes you the Threat Policy Analysis page. See Threat Policy Analysis Overview. From there you can view your changes and choose to Update now, Update later, or Save them in draft form without updating.