Viewing Functional Audit Results
To view the results of a functional audit of a service, follow this procedure:
After performing a functional audit on a service (see Performing a Functional Audit), look at the functional audit results:
- In the Network Activate task pane, select Service Provisioning > Manage Services.
- On the Manage Services page, select the service for which you want to view the functional audit results.
- Either open the Actions drawer and select View Functional Audit Results, or select the same command from
the right mouse-click menu.
The Functional Audit Result page appears, displaying Service Status in the right panel.
If a CFM is configured in a P2P service or VPLS service, the functional audit results includes the result of both Network Activate and CFM service.
A green up-arrow in the Service Status header bar indicates that the service has passed the functional audit in both the control plane and the data plane. A red down-arrow indicates that the service failed either or both the control plane validation and the data plane validation.
Depending on the type of service, the left panel lists
The name of the service
Each endpoint in the service
Icons representing the endpoint indicate its role in the service and its up or down state. Table 1 describes these icons for a point-to-multipoint service.
Table 1: Point-to-Multipoint Service Endpoint Icons
Hub in a point-to-multipoint service. Endpoint state is up.
Hub in a point-to-multipoint service. Endpoint state is down.
Spoke in a point-to-multipoint service. Endpoint state is up.
Spoke in a point-to-multipoint service. Endpoint state is down.
A numeric value indicating the subinterface name: the VLAN-ID for an 802.1Q interface, the service VLAN-ID for a Q-in-Q interface, or 0 for a dedicated port.
- To show all endpoints in the service, in the left panel header, select All. To display only the endpoints indicating failed validation, select Failed. Failed is dimmed if the functional audit returned no validation errors.
- To view details for an individual interface or endpoint, select it in the left panel. The header bar on the right panel changes to End Point or Interface Status, and details for the selected item are displayed below.
- Expand each device to show the link from that device to
the other N-PE device in the service.
An icon next to each link indicates whether the functional audit commands reported correct functioning of the control plane and data plane. Table 2 describes these icons.
Table 2: Functional Audit Success Status Icons
Control plane and data plane function correctly.
Errors were reported in the functioning of either the control plane or the data plane.
- In the left panel, select a link.
The panel to the right shows the validation results for the control plane validation and data plane validation for the selected link. Icons indicate the success or failure of each set of tests.
The panel to the right shows the validation results for the control plane validation and data plane validation for the selected link. Icons indicate the success or failure of each of these sets of tests. Table 3 describes icons and the textual information provided in the box beside the icon.
Table 3: Multipoint-to-Multipoint Service Control Plane and Data Plane Validation Icons
Control plane up
The text box shows the name of the remote N-PE device and confirms that the data plane is operational.
Control plane down
The text box shows the name of the configured remote N-PE device and, in the Command status field, explains why the test failed.
Control plane status unknown
The text box indicates the name of the configured remote N-PE device and, in the Result field, an explanation as to why the functional audit operation was unable to test the control plane—for example, configuration was missing on the device.
Data plane up
The text box indicates the number of packets transmitted and received, and confirms that no data packets were lost during the audit.
Data plane down
The text box indicates that data packets were lost during the audit.
Data plane status unknown
The functional audit was unable to complete the data plane test. The Result field in the text box indicates the reason—for example, the platform does not support data plane testing, or the connection to the remote N-PE device is down.
The control plane and data plane validation checks must both show operational status for the link to be considered operational.
- To troubleshoot a service, open the Troubleshooting tab. To select the status you want to check, click the device from
the device list on the left, and select the show command from the Command list.
An icon next to each command indicates whether the command execution is successful or failed. Table 4 describes these icons.
Table 4: Command Status Icons
Command execution is successful and the command status is up.
Command execution is failed, or,
In case of multiple rows, one of the status value is down
Data plane information between two endpoints in a VPLS service is provided only for MX Series devices. This information is not provided for M Series devices.
Junos OS Release 9.3 and Junos OS Release 9.4 do not support data plane validation. The Functional Audit Results page does not display data plane validation information if any device in the service is running one of these Junos OS releases.