Viewing Configuration Audit Results
After performing a configuration audit, check the detailed results of the audit:
- In the Network Activate task pane, select Service Provisioning > Manage Services.
- In the Manage Services page view, select the service you are investigating.
- Open the Actions menu and select View
Configuration Audit Results.
Examine the audit results for missing configuration information, and keep the page open for later comparison with the service configuration in the Junos Space database.
You can validate policies for the hub and spoke (1 interface).
- To view the service configuration in the Junos Space database,
double click the service icon in the Manage Services page,
then in the Actions menu, select View Service Configuration.
A new page opens and shows the service configuration.
If a CFM is configured in P2P service or VPLS service, the configuration audit result displays the CFM configuration details.
- Compare the contents of the Service Configuration with
those of the Configuration Audit Results page for each
device in turn. If you see discrepancies, then it is likely that the
service configuration was modified out-of-band. If so, you might need
to synchronize the device with the Junos Space database.
For step-by-step instructions about synchronizing devices, see Resynchronizing Managed Devices with the Network for details.