Performing Service Activation Test
Starting with Cross Provisioning Platform (CPP) Release 17.1R1, in addition to provisioning Juniper Networks devices, Nokia devices, and NEC’s iPASOLINK devices, the CPP application can provision services across Juniper Networks devices and Canoga Perkins network interface devices (NIDs).
You can perform service activation test on services between Juniper Networks devices and Canoga Perkins NIDs.
Before you perform the service activation test, you must load the Stylesheet Language Alternative Syntax (SLAX) script in Network Management Platform > Images and Scripts > Scripts.
To perform the service activation test:
- In the Cross Provisioning Platform task pane,
select CPP > Services.
The Services page appears.
- Double-click a service.
The View Service page appears.
- Select a Canoga Perkins NID for which you need to perform the service activation test.
- Right-click the Canoga Perkins NID that you have selected,
and select Execute Op Script to execute a SLAX script for
performing the service activation test.
The Execute OP Scripts page appears.
Starting in CPP, Release 17.1R1, the Execute Op Script field is added to perform the service activation test.
- Specify values for the required parameters.
The parameters that are displayed are based on the script that you have attached.
- Click Execute.
A job is created. After the job is successfully completed, you can view the results in the Job Details page.