Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Synchronizing Canoga Perkins NIDs with OSS

 

Starting with Cross Provisioning Platform (CPP) Release 17.1R1, in addition to provisioning Juniper Networks devices, Nokia devices, and NEC’s iPASOLINK devices, the CPP application can provision services across Juniper Networks devices and Canoga Perkins network interface devices (NIDs).

You can perform the following synchronization operations after you have added Canoga Perkins network interface devices (NIDs):

Synchronizing All Canoga Perkins NIDs with OSS

You can synchronize all Canoga Perkins NIDs with the OSS to ensure that all the Canoga Perkins NIDs managed in the CanogaView OSS are staged to the Cross Provisioning Platform application.

To synchronize all Canoga Perkins NIDs:

  1. In the Cross Provisioning Platform task pane, select CPP > Third-Party Devices.

    The Third-Party Devices page appears.

  2. Select the Synchronize all the devices with OSS icon.

    The OSS Synchronization page appears.

  3. In the Vendor field, select Canoga from the drop-down list.Note

    Select All in the Vendor field to synchronize all third-party devices.

  4. Click Sync.

A job is created to synchronize all Canoga Perkins NIDs with OSS.

Synchronizing Selected Canoga Perkins NIDs with OSS

You can synchronize selected Canoga Perkins NIDs with the OSS to ensure that the selected Canoga Perkins NIDs managed in CanogaView are staged to the Cross Provisioning Platform application.

To resynchronize information for Canoga Perkin NIDs that you have selected:

  1. In the Cross Provisioning Platform task pane, select CPP > Third-Party Devices.

    The Third-Party Devices page appears.

  2. Select one or more Canoga Perkins NIDs.

    You can select up to 10 NIDs. If you want to select more than 10 NIDs, you must increase the value of the Number of devices for sync with OSS request field in OSSConfigParameters > Canoga OSS Configuration.

  3. Select the Synchronize selected devices with OSS icon.

    The Synchronize selected devices with OSS page appears.

  4. In the Vendor field, select Canoga from the drop-down list.Note

    Select All in the Vendor field to synchronize all third-party devices.

  5. Click Sync.

A job is created to resynchronize the selected Canoga Perkins NIDs with OSS.

Resynchronizing Failed Canoga Perkins NIDs Based on the Port Number

This operation is not applicable for Canoga Perkins NIDs because the ports are synchronized and fetched statically.

Scheduling OSS Synchronization for Canoga Perkins NIDs

You can schedule a synchronization of Canoga Perkins NIDs with the OSS.

To schedule synchronization of Canoga Perkins NIDs:

  1. In the Cross Provisioning Platform task pane, select CPP > Third-Party Devices.

    The Third-Party Devices page appears.

  2. Select the Schedule OSS Synchronization Job icon.

    The Schedule OSS Synchronization page appears.

    You can configure the synchronization schedule time in OSSConfigParameters > Canoga OSS Configuration > Synchronize OSS Inventory daily at given time. The default value is 5:00 AM.

  3. In the Vendor field, select Canoga from the drop-down list.Note

    Select All in the Vendor field to schedule synchronization of all third-party devices.

  4. Click Schedule.

    The synchronization schedule for Canoga Perkins NIDs is updated.

Canceling OSS Synchronization for Canoga Perkins NIDs

You can cancel the synchronization of Canoga Perkins NIDs that you have scheduled.

To cancel synchronization of Canoga Perkins NIDs:

  1. In the Cross Provisioning Platform task pane, select CPP > Third-Party Devices.

    The Third-Party Devices page appears.

  2. Select the Cancel OSS Synchronization icon.

    The Cancel OSS Synchronization page appears.

  3. In the Vendor field, select Canoga from the drop-down list.Note

    Select All in the Vendor field to cancel synchronization of all third-party devices.

  4. Click OK.

    A status of the canceled synchronization is listed.

Release History Table
Release
Description
Starting with Cross Provisioning Platform (CPP) Release 17.1R1, in addition to provisioning Juniper Networks devices, Nokia devices, and NEC’s iPASOLINK devices, the CPP application can provision services across Juniper Networks devices and Canoga Perkins network interface devices (NIDs).