Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Modifying a Saved Service Order

 

Before a service order can affect a service, it must transition through the following states:

  • Requested—When the service provisioner has created the service order, but has not yet attempted to deploy it or schedule it for deployment, the service order is in the Requested state.

  • Scheduled—After the service provisioner has scheduled the service order for deployment, the service order transitions to the Scheduled state.

  • In Progress—When a scheduled service order reaches its time for deployment, it transitions to the transitory In Progress state. From this state, the Junos Space software attempts to deploy the service.

  • Validated—When all the information in the service order is successfully validated, the service order transitions to the Validated state.

  • Completed—Successful deployment transitions the service order to the Completed state.

  • Invalid—If the Junos Space software cannot deploy the service because of invalid information in the service order itself, the service order enters the Invalid state. The service provisioner must resolve the issues that cause the failure before re-creating the service order and rescheduling it for deployment.

  • Failed Deploy—If the device is down or the Junos Space software is unable to push the service configuration to the device, the service order transitions to the Failed Deploy state.

Figure 1 illustrates the service order states.

Figure 1: Service Order States
Service Order States

To view the state of a service order, select Network Activate > Service Provisioning > Manage Service Orders. The Manage Service Orders inventory page lists the service orders and their state.

The Junos Space Network Activate application provides the flexibility to modify an existing service order. You can modify a service order when the order state is Requested, Validated, or Invalid. You cannot modify a service order when the order state is Scheduled, Completed, or Failed Deploy.

To modify a service order:

  1. Select Network Activate > Service Provisioning > Manage Service Orders.
  2. Right-click an existing service order, and then select Service > Modify.

    The Modify Service Order page appears.

    Note

    The modify option is unavailable if the service order is in Scheduled, or Completed, or Failed Deployed state.

  3. Modify the fields as needed.

    The following table lists the fields that you can modify in a point-to-point service order, VPLS service order, and Layer 3 VPN service order.

    Point-to-Point Service Order

    VPLS Service Order

    Layer 3 VPN Service Order

    Name

    Name

    Name

    Customer

    Customer

    Customer

    Comments

    Comments

    Comments

    VLAN ID

    VLAN ID

    VLAN ID

    VCID

    Inner VLAN ID

    Route Target

    CFM

    VLAN Tag to stack

    Hub Route Target

    PE device

    PE device

    Spoke Route Target

    UNI interface

    UNI interface

    UNI Interface

    UNI description

    UNI description

    Route Distinguisher

    MTU (Bytes)

    MTU

    Hub Route Distinguisher

    Bandwidth

    Bandwidth

    Spoke Route Distinguisher

    RSVP LSP name

    Enable P2P-Spoke

    Autopick Interface IP Address

    PW backup settings

    Ethernet Option in case of Asymmetric

    VRF Table label

    VPI

    Neighbor Hub

    Export Direct Routes

    VCI

    Backup NeighborHub

    AS override

    Outgoing label

    Hub

    Hub

    -

    Customer VLAN Range Start

    Maximum prefixes

    -

    Customer VLAN Range End

    IP address pool

    Note: While modifying a Layer 3 VPN service order, you must select the IP address pool.

    -

    MAC learning

    Peer AS

    -

    Interface MAC limit

    -

    -

    MAC statistics

    -

    -

    MAC table size

    -

    -

    Disable tunnel services

    -

    -

    Disable local switching

    -

    -

    Fast reroute priority

    -

    -

    Label block size

    -

    -

    Connectivity type

    -

    Note

    You can change a managed device to an unmanaged device, and an unmanaged device to a managed device. You can also change a local switching service order to a normal point-to-point service order.

  4. Click Save.

    The service order is modified. You can now deploy the service order with modified parameters to the device.