Predefined Full Mesh Layer 3 VPN Service Definitions
The Network Activate software section provides information about predefined service definitions used for creating Layer 3 VPN full mesh services.
If neither of the predefined service definitions described here is appropriate for your needs, you can create a service definition as described in Creating a Full Mesh Layer 3 VPN Service Definition.
The Network Activate software provides predefined service definitions for Layer 3 VPN services that use the BGP or OSPF protocols.
Information specific to each service instance, such as the device name, endpoint name, VLAN ID, Interface IP, Peer AS (BGP), and whether you want to allow a service provisioner to create static routes on the service, is provided in the service order.
Table 1 lists each of the standard VPLS service definitions. Each standard service definition is then described in detail in the sections that follow.
Table 1: Standard Point-to-Multipoint Service Definitions
Standard Service Definition Name
Predefined Service Attributes
L3VPN-OSPF-STATIC L3 VPN (Full Mesh)
L3VPN-BGP-STATIC L3 VPN (Full Mesh)