Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Predefined Point-to-Point Service Definitions

 

The Network Activate software provides predefined service definitions that a service provisioner can choose from when creating a service order. This section provides information about predefined service definitions used for creating Ethernet point-to-point services. For information about predefined service definitions used to create other types of service, see the following topics:

If none of the point-to-point predefined service definitions described here is appropriate for your needs, you can create a service definition as described in Creating a Point-to-Point Ethernet Service Definition,

The Network Activate software provides predefined service definitions for Ethernet point-to-point services that use LDP switching or BGP in the network core. The LDP based services are sometimes known as E-Line Martini services, and the BGP based services are sometimes known as E-Line Kompella services. Figure 1 shows an example of such a service.

Figure 1: Point-to-Point Service
Point-to-Point Service

Information specific to each service instance, such as the device name, endpoint name, and customer VLAN ID, is provided in the service order. Attributes that can apply across many service instances are typically defined in the service definition. These attributes include:

  • Ethernet option (dot1.q, port-port, qinq)

  • Traffic type (single VLAN, multiple VLAN, all traffic)

  • Physical interface encapsulation

  • Logical interface encapsulation

  • Rate limit range

Table 1 lists each of the standard point-to-point service definitions. Each standard service definition is then described in detail in the sections that follow.

Table 1: Standard Ethernet Point-to-Point Ethernet Service Definitions

Standard Service Definition Name

Service Attributes

ELine-Dot1q-SingleVLAN Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • 802.1Q endpoint interface types

  • Customer traffic is single VLAN

  • Flexible-ethernet-services physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-Dot1q-SingleVLAN-CCC Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • 802.1Q endpoint interface types

  • Customer traffic is single VLAN

  • Vlan-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-Dot1q-SingleVLAN-Ext-CCC Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • 802.1Q endpoint interface types

  • Customer traffic is single VLAN

  • Extended-vlan-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-PortBased Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • Port-based UNI

  • Ethernet-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-QinQ-AllVLAN Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • All customer traffic

  • Flexible-ethernet-services physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-QinQ-AllVLAN-CCC Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • All customer traffic

  • Vlan-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-QinQ-AllVLAN-Ext-CCC Service Definition

  • Point-to-point service for M Series and MX Series routers

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • All customer traffic

  • Extended-vlan-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-QinQ-VLANRange Service Definition

  • Point-to-point service for MX Series routers only

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • Customer traffic is range of VLANs

  • Flexible-ethernet-services physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-QinQ-VLANRange-CCC Service Definition

  • Point-to-point service for MX Series routers only

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • Customer traffic is range of VLANs

  • Vlan-ccc physical encapsulation type

  • Rate limiting from 10 Mbps to 100 Mbps with 10  Mbps increment

ELine-QinQ-VLANRange-Ext-CCC Service Definition

  • Point-to-point service for MX Series routers only

  • Gigabit Ethernet interfaces

  • Q-in-Q endpoint interface types

  • Customer traffic is range of VLANs

  • Extended-vlan-ccc physical encapsulation

  • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

TDM Interface

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • T1 interfaces

  • satop physical encapsulation

Static TDM pseudowire

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • T1 interfaces

  • satop physical encapsulation

  • Static pseudowire

ATM pseudowire

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • ATM/T1interfaces

  • atm-cc-cell-relay physical encapsulation

ATM-AAL5 pseudowire

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • ATM/T1interfaces

  • atm-ccc-vc-mux/aal5 physical encapsulation

Static ATM pseudowire

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • ATM/T1 interfaces

  • atm-ccc-cell-relay/atm physical encapsulation

  • Static pseudowire

Static ATM-AAL5 pseudowire

  • Point-to-point service for MX Series routers and BX7000 Gateways only

  • ATM/T1 interfaces

  • atm-ccc-vc-mux / aal5 physical encapsulation

  • Static pseudowire

Eline-BGP-QinQ-AllVLAN

  • Ethernet service for M Series, MX Series, and ACX Series routers

  • Gigabit Ethernet interface

  • Q-in-Q endpoint interface type

  • Transport all traffic

  • Flexible-ethernet-services physical encapsulation type

  • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

Eline-BGP-Dot1q-SingleVLAN

  • Ethernet service for M Series, MX Series, and ACX Series routers

  • Gigabit Ethernet interface

  • 802.1Q endpoint interface types

  • Single VLAN traffic

  • Flexible-ethernet-services physical encapsulation type

  • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-BGP-Port-Based

  • Ethernet service for M Series, MX Series, and ACX routers

  • Gigabit Ethernet interface

  • Port-based UNIs

  • Ethernet-ccc physical encapsulation type

  • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

ELine-Dot1q-SingleVLAN Service Definition

This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-Dot1q-SingleVLAN-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-Dot1q-SingleVLAN-Ext-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-PortBased Service Definition

This service definition provides a base for creating point-to-point services that transport all traffic across an LDP or BGP network core using an entire port at each endpoint using ethernet-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps to 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-AllVLAN Service Definition

This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-AllVLAN-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-AllVLAN-Ext-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-VLANRange Service Definition

This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-VLANRange-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-QinQ-VLANRange-Ext-CCC Service Definition

This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

ELine-BGP-Port-Based

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

Eline-BGP-Dot1q-SingleVLAN

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

Eline-BGP-QinQ-AllVLAN

The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

Configuration on Endpoint A

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

Configuration on Endpoint Z

The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z: