Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQs
Release Notes
Contents  

Retrying a Failed Job on Devices in Security Director

You can retry jobs that did not complete successfully on devices where they were configured to run from the Job Management page. Retrying a failed job allows you to save time because you do not need to create the job again and execute it, but can retry the failed job.

The following jobs can be retried if they fail:

Procedure

To retry a job on the devices on which it failed:

  1. Select Monitor > Job Management.

    The Job Management page appears.

  2. Select the job that you want to retry. From the right-click or More menu, select Retry on failed devices.

    The Retry on Job-Name page appears, displaying the list of devices on which you can retry the job.

  3. Specify the parameters for the job retry according to the guidelines provided in Table 54.
  4. Click OK to retry the jobs.

    The Job Details page appears displaying the details of the job.

  5. Click OK.

    You are returned to the Job Management page.

Table 54: Retry Job Settings

Setting

Guideline

Type

Specify whether the job should be run immediately or later. If you specify that the operation should be run later, you must specify a start date and time (in MM/DD/YYYY and HH:MM:SS 24-hour or AM/PM formats) for the job.

Recurrence

Specify whether the job should be done on a recurring basis.

This field is displayed if the job was created as a recurring job.

Repeat

Specify the periodicity of the recurrence:

  • Minutes
  • Hourly
  • Daily (default)
  • Weekly
  • Monthly
  • Yearly

Every

Specify the period at which the job retry should recur. For example, if you specified a periodicity in hours (Hourly), enter the number of hours after which the job retry should recur.

On

Specify one or more days on which you want the job to recur.

Note: This field is displayed only when you specify a weekly periodicity (Weekly).

The day on which the retry is scheduled is disabled. For example, if you scheduled the retry on a Wednesday, then Wed is selected by default and disabled. You can select other days by enabling the corresponding check boxes.

Ends

Specify one of the following:

  • Select Never to continue (without an end date) the recurring operation at the specified recurrence interval.
  • Select On and specify a date and time on which to stop the recurring operation.

Summary

Displays a summary of the recurrence.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit