TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Modifying VPN Settings

Using the Modify VPN wizard, you can modify the following VPN settings:

To modify the VPN settings:

Select Configure > IPsec VPN > VPNs. The VPN page appears.
Right-click the VPN that you want to modify, or select Modify VPN from the More list. The Modify VPN page appears.
Edit the required sections and click Finish.

To modify the general settings of a VPN:

You can modify the associated devices of your VPN using this option.

Select Devices option to modify its endpoint settings. You can add more endpoints listed in the Available column or remove the already configured endpoints listed in the Selected column.
Select Extranet option to modify endpoint settings of extranet devices. You can add more devices listed in the Available column or remove the already configured devices listed in the Selected column.
Click Next to modify tunnel settings.

You can modify the following tunnel or route settings of your VPN using this option.

Click Next to modify device endpoint settings.

You can modify the following endpoint settings for each device under this option. Click on each column to edit the value.

To view or edit tunnel configuration for each device:

Select the device and click View / Edit Tunnel option. The Tunnels page appears.
Click on each column to edit the respective values.
Click OK.