Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Monitoring Performance Management Statistics

    The following topics show how to monitor the performance statistics for point-to-point and VPLS services:

    Monitoring Statistics for Point-to-Point Service

    In the Network Activate task pane, select Service Provisioning > Manage Services.

    To monitor the statistics for the point-to-point service:

    1. Right-click a point-to-point service and select Start PM Statistics. The Monitor Performance Statistics window is displayed.

      Note: The Start PM Statistics action is enabled only if the CFM is enabled in the selected point-to-point service. Always perform a functional audit before monitoring the statistics. The Start PM Statistics action is disabled if the functional audit status of a service is Down.

    2. Fill in the fields as indicated in the table.

      Field

      Action

      Local Device

      Select a local device from the list.

      Remote Device

      Select a remote device from the list.

      Count

      Specify the number of frames to be sent to a specific peer MEP.

      Range: 1 through 65,535 frames

      Default: 10 frames

      Wait Interval

      Specify the wait interval for the frame transfer.

      Range: 1 through 255 seconds

      Default: 1 second

      Priority (dot1p)

      Select the 802.1p priority of continuity-check and link-trace packet.

      Range: 0 through 7

      Default: 0

      Monitor Statistics

      Select one of the following:

      • Two-Way delay
      • One-Way delay
      • Loss
    3. Click OK.

    This action initiates a statistics collection on the endpoint device. The View PM Statistics action is enabled on successful initiation of the statistics.

    Monitoring Statistics for VPLS Service

    In the Network Activate task pane, select Service Provisioning > Manage Services.

    To monitor the statistics for the VPLS Service:

    1. Right-click a VPLS service and select Start PM Statistics. The Monitor Performance Statistics window is displayed.

      Note: The Start PM Statistics action is enabled only if the CFM is enabled in the selected VPLS service. Always perform a functional audit before monitoring the statistics. The Start PM Statistics action is disabled if the functional audit status of a service is Down.

    2. Fill in the fields as indicated in the table.

      Field

      Action

      Local Device

      Select a local device from the list.

      Remote Device

      Select a remote device from the list.

      Count

      Specify the number of frames to be sent to a specific peer MEP.

      Range: 1 through 65,535 frames

      Default: 10 frames

      Wait Interval

      Specify the wait interval for the frame transfer.

      Range: 1 through 255 seconds

      Default: 1 second

      Priority (dot1p)

      Select the 802.1p priority of continuity-check and link-trace packet.

      Range: 0 through 7

      Default: 0

      Monitor Statistics

      Select Two-Way delay.

    3. Click OK.

    This action initiates a statistics collection on the endpoint device. The View PM Statistics action is enabled on successful initiation of the statistics.

    Modified: 2013-09-19