Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating and Deploying a Device Configlet Order for Cross Provisioning Platform

    To create a device configlet for Cross Provisioning Platform:

    1. In the Cross Provisioning Platform task pane, select CPP > Device Configlets Order.
    2. In the Device Configlets Order window, click the Create CPP Device Configlet icon (+).
    3. In the Create CPP Device Configlet Order, select the Service definition using the unique identifier ID associated with each service definition or name of the service definition.

      Note: The value in the ID field is associated with a service definition. This identifier can be used when you are searching for a particular service definition while creating a device configlet order. You can search the service definition by its name, type or unique ID. You can modify the ID only during the migration of old service definition IDs.

    4. In the Order description field, type a description for the service configlet.
    5. Click Next.
    6. Fill in the fields in the Create Device Configlet Order window as described in the following table.

      Field

      Description

      Name

      Type a name for the configlet

      Device

      Browse to locate the device upon which you want the configlet to operate.

      Host Name

      Type the hostname of the device upon which you want the configlet to operate.

      Primary Lookback IP

      Type the loopback address of the device.

      Device Role

      Select the role that you want the device to serve in the network:

      • L2E
      • Edge
      • Trunk

      Region

      Select the region where the device is located.

      Uplink Interface 1

      Select an interface connected to the upstream provider-edge device.

      Uplink Interface 2

      Select an interface connected to the upstream provider-edge device.

      L2E UNI Interface

      This field is displayed if you selected L2E as the Device Role.

      Select the L2E UNI interface.

      L2E UNI Inner VLAN Id

      This field is displayed if you selected L2E as the Device Role.

      Specify the inner VLAN ID of the L2E UNI interface.

      L2E UNI Outer VLAN Id

      This field is displayed if you selected L2E as the Device Role.

      Specify the outer VLAN ID of the L2E UNI interface.

    7. Click Create.

      The device configlet order is deployed, and you can view the device configlet order in the Device Configlet Orders inventory page.

      If you want to create and deploy more orders, click Create More.

    Modified: 2017-02-15