Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Administering Bulk Service Operations in Cross Provisioning Platform

    Use the Bulk Service Operations page to delete services in bulk, migrate service interfaces, or resynchronize services.

    To administer bulk service operations in Cross Provisioning Platform:

    1. On the Cross Provisioning Platform task pane, select CPP > Bulk Service Operations.
    2. On the Bulk Service Operations inventory page, you can perform the following actions:

      Action

      Procedure

      Service Deletion

      To delete the services in bulk:

      1. Select the Service Deletion option button.

        Service Type is displayed.

      2. Select an option button from Service Type.
        • PW-LDP—Select this option button if you want to delete LDP-based point-to-point services.
        • PW-BGP—Select this option button if you want to delete BGP-based point-to-point services.

        Note: Only LDP-based and BGP-based point-to-point services are supported. If PW-LDP or PW-BGP options are unavailable, you must verify the roles assigned to your user account. For information about roles, see Creating a User-Specific Role to Prevent or Allow Certain Actions on a Service.

      3. On the Step 1: Select Device grid, select a device.

        The corresponding interfaces are listed on the Step 2: Select Interface grid.

      4. On the Step 2: Select Interface grid, select an interface.

        The corresponding services are listed on the Step 3: Select Service(s) grid.

      5. On the Step 3: Select Service(s) grid, select the services.

        Note: The number of services is restricted to 20.

      6. Click Decommission.

        The Schedule Decommission window appears.

      7. Do one of the following:
        • To decommission the service immediately, select Decommission now and click OK.
          1. In the Order Information window, click the job ID of the decommission job.

            The Job Management page that appears displays a filtered view of the job inventory, showing only the decommission job.

          2. Double-click the job.

            The Bulk Service Deletion Deployment window appears. You can view the list of service orders that are deleted.

        • To decommission the service at a later time, select Decommission later, select a date and time, then click OK.

      Interface Migration

      When an interface becomes faulty or needs to be migrated to a higher-capacity port, you must migrate all services deployed on a specific interface to the destination interface on the same device. The Cross Provisioning Platform application modifies the device configuration to migrate all the services. The Cross Provisioning Platform application deletes the source interface and adds the destination interface to the service.

      For information about migrating service interfaces, see Migrating Service Interfaces in Cross Provisioning Platform.

      Resync Services

      The Cross Provisioning Platform allows you to perform service resynchronization to validate and merge selected services with the current configuration of the devices or network. You can resynchronize the configuration changes made within the same device or different devices. The information about migrated devices is obtained from the latest configuration of a device using VCID and the IP address of the neighboring device.

      When you perform the Resync Services action, the service configurations in the Cross Provisioning Platform database are updated with the latest values. Following are the parameters that are updated in the Cross Provisioning Platform database:

      • Device
      • Interface
      • VLAN ID

      To perform service resynchronization:

      1. Select the Resync Service option button.

        The Service Type section is displayed. By default, PW_LDP is selected.

        Note: This feature is supported only on LDP-based point-to-point services, deployed on Juniper Networks and Nokia devices. If the LDP-based point-to-point service is configured for a Layer 2 Ethernet device, Layer 2 Ethernet configurations are not validated.

      2. On the Step 1: Select Device grid, select Vendor and select the device from the list.

        The corresponding interfaces are listed on the Step 2: Select Interface grid.

      3. On the Step 2: Select Interface grid, select an interface.

        The corresponding services are listed on the Step 3: Select Service(s) grid.

      4. On the Step 3: Select Service(s) grid, select the services.
      5. Click Resync.
      6. In the Order Information window, click the job ID.

        The Job Management page that appears displays a filtered view of the job inventory, showing only the resynchronization job.

      7. Double-click the job.

        The Bulk Deployment window appears. You can view the list of services that are updated.

    Modified: 2017-02-22