Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Adding Logging Nodes

    Use this page to configure logging nodes. You must deploy the Log Collector and then add it to the Junos Space Network Management Platform fabric to view the log data in the dashboard, events and logs, reports, and alerts.

    You can deploy log collectors in both VM and JA2500 appliance. For easy scaling, begin with a single log receiver node and log storage node and incrementally add log storage nodes as your needs expand. You can add a maximum of 1 log receiver node and 3 log storage nodes.

    Before You Begin

    • Read the Logging and Reporting Overview topic.
    • Configure Syslog and Security logging configuration from Devices > Security Devices > Modify Configuration. See Modifying the Configuration of Security Devices.
    • The eps rate of up to 1000, requires a single Log Collector Node. You must deploy and configure a Log Collector VM in All-in-One node.
    • The eps rate of up to 10,000, requires a log storage node and a log receiver node.
    • Review the Logging Management main page for an understanding of your current data set. See Logging Nodes Main Page Fields for field descriptions.
    • Log collector is supported both on a VM and JA2500 appliance that can be deployed on a VMware ESX server.

    Adding Logging Nodes

    To add Log Collector to Security Director:

    1. Select Administration > Logging Management > Logging Nodes.
    2. Click the plus icon (+) to add logging nodes. The Add Logging Node page appears.
    3. Click Next.
    4. Complete the configuration for Add Collector Node according to the guidelines provided in Table 1.
    5. Click Add another node to add multiple nodes.
    6. Click Finish.
    7. Review the summary of configuration changes from the summary page.
    8. Click OK.

    A new logging node with your configurations is added. To verify if the node is configured correctly, click Logging Management to check the status of the node.

    Table 1: Logging Node Settings

    Settings

    Guidelines

    Node Name

    Enter a unique name for the node that is a string of alphanumeric characters, colons, periods, dashes, and underscores. No spaces are allowed and the maximum length is 29 characters.

    IP Address

    Enter an IPv4 or IPv6 address for the node.

    User Name

    Enter a username. Spaces are allowed and maximum length is 29 characters.

    Password

    Enter a password for the logging node. The password must be at least six characters. You can use both uppercase and lowercase letters, as well as numbers and characters.

    Modified: 2016-12-15