Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating a Cross Provisioning Platform Service Order for iPASOLINK Devices

    Before you create a cross provision platform service order, you must create the service definition upon which to base the service order. Foe example, if you want to create a VLAN-PATH service order you must have created a service definition with Type as VLAN-PATH and must have attached the corresponding VLAN-PATH-related predefined scripts.

    To create a Cross Provisioning Platform service order:

    1. in the Cross Provisioning Platform task pane, select CPP > Service Orders.
    2. In the Service Orders window, click the + button. The Create CPP Service Order window appears.
    3. In the General Settings section, select a service definition based on the unique ID, name or type. For configuring VLAN path between iPASOLINK devices you must select the service definition with service type as VLAN-PATH.

      Note: The value in the ID field is associated with a service definition. This identifier can be used when you are searching for a particular service definition while creating a device configlet order. You can search the service definition by its name, type or unique ID. You can modify the ID only during the migration of old service definition IDs.

    4. In the Order description field, enter a description of the service that distinguishes its operation from others.
    5. Click Next.

      The iPASOLINK VLAN Path Provisioning page appears.

      Note: The following representation of a iPASOLINK VLAN Path Provisioning page window is a sample only. The appearance of this window is based on the scripts that are associated with the service definition upon which the service is based.

    6. In the Step1: Select Device section, select a device.
    7. In the Step2: Select Interface section, select the corresponding interfaces.
    8. Click Add to Staged Interfaces.

      The selected devices will be listed in the Step3: Enter Staged Interface Details section.

    9. In the Step3: Enter Staged Interface Details, specify the following parameters for each interface:
      • VLAN ID
      • VLAN Service Name
      • Port Type
      • QOS Settings

        Note: This is applicable for VLAN-PATH service type only.

      • L2 Extension

        The L2 Extension section is available for L3VPN-IPASO or P2P-IPASO service types only.

        Note: iPASOLINK devices are assigned a role of Layer 2 Ethernet (L2E) device. When you create Pseudowire and Layer 3 VPN or point-to-point services across Juniper Networks devices, you can attach multiple iPASOLINK devices as these services support multiple L2E endpoints.

    10. (Optional) Click Clear if you want to reset the selections.
    11. (Optional) Before you click Create, to verify the configuration click Verify.
    12. Click Create to create the service order.
    13. Deploy the service order.

      For more information on deploying a service order, see Deploying a Service Order.

      After you successfully deploy the service order, the service order is listed on the Services page.

    On the Services page, you can perform the following actions:

    • View a service.
    • Modify a service
    • Decommission a service
    • Perform Functional Audit
    • Perform Configuration Audit

    Note: The Cross Provisioning Platform application does not support two-phase commit and delete partial configurations options for iPASOLINK devices.

    Modified: 2017-02-21