Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Predefined Point-to-Point Service Definitions

    The Network Activate software provides predefined service definitions that a service provisioner can choose from when creating a service order. This section provides information about predefined service definitions used for creating Ethernet point-to-point services. For information about predefined service definitions used to create other types of service, see the following topics:

    If none of the point-to-point predefined service definitions described here is appropriate for your needs, you can create a service definition as described in Creating a Point-to-Point Ethernet Service Definition,

    The Network Activate software provides predefined service definitions for Ethernet point-to-point services that use LDP switching or BGP in the network core. The LDP based services are sometimes known as E-Line Martini services, and the BGP based services are sometimes known as E-Line Kompella services. Figure 1 shows an example of such a service.

    Figure 1: Point-to-Point Service

    Point-to-Point Service

    Information specific to each service instance, such as the device name, endpoint name, and customer VLAN ID, is provided in the service order. Attributes that can apply across many service instances are typically defined in the service definition. These attributes include:

    • Ethernet option (dot1.q, port-port, qinq)
    • Traffic type (single VLAN, multiple VLAN, all traffic)
    • Physical interface encapsulation
    • Logical interface encapsulation
    • Rate limit range

    Table 1 lists each of the standard point-to-point service definitions. Each standard service definition is then described in detail in the sections that follow.

    Table 1: Standard Ethernet Point-to-Point Ethernet Service Definitions

    Standard Service Definition Name

    Service Attributes

    ELine-Dot1q-SingleVLAN Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • 802.1Q endpoint interface types
    • Customer traffic is single VLAN
    • Flexible-ethernet-services physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-Dot1q-SingleVLAN-CCC Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • 802.1Q endpoint interface types
    • Customer traffic is single VLAN
    • Vlan-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-Dot1q-SingleVLAN-Ext-CCC Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • 802.1Q endpoint interface types
    • Customer traffic is single VLAN
    • Extended-vlan-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-PortBased Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • Port-based UNI
    • Ethernet-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-QinQ-AllVLAN Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • All customer traffic
    • Flexible-ethernet-services physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-QinQ-AllVLAN-CCC Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • All customer traffic
    • Vlan-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-QinQ-AllVLAN-Ext-CCC Service Definition

    • Point-to-point service for M Series and MX Series routers
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • All customer traffic
    • Extended-vlan-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-QinQ-VLANRange Service Definition

    • Point-to-point service for MX Series routers only
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • Customer traffic is range of VLANs
    • Flexible-ethernet-services physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-QinQ-VLANRange-CCC Service Definition

    • Point-to-point service for MX Series routers only
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • Customer traffic is range of VLANs
    • Vlan-ccc physical encapsulation type
    • Rate limiting from 10 Mbps to 100 Mbps with 10  Mbps increment

    ELine-QinQ-VLANRange-Ext-CCC Service Definition

    • Point-to-point service for MX Series routers only
    • Gigabit Ethernet interfaces
    • Q-in-Q endpoint interface types
    • Customer traffic is range of VLANs
    • Extended-vlan-ccc physical encapsulation
    • Rate limiting from 10 Mbps to 100 Mbps with 10 Mbps increment

    TDM Interface

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • T1 interfaces
    • satop physical encapsulation

    Static TDM pseudowire

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • T1 interfaces
    • satop physical encapsulation
    • Static pseudowire

    ATM pseudowire

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • ATM/T1interfaces
    • atm-cc-cell-relay physical encapsulation

    ATM-AAL5 pseudowire

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • ATM/T1interfaces
    • atm-ccc-vc-mux/aal5 physical encapsulation

    Static ATM pseudowire

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • ATM/T1 interfaces
    • atm-ccc-cell-relay/atm physical encapsulation
    • Static pseudowire

    Static ATM-AAL5 pseudowire

    • Point-to-point service for MX Series routers and BX7000 Gateways only
    • ATM/T1 interfaces
    • atm-ccc-vc-mux / aal5 physical encapsulation
    • Static pseudowire

    Eline-BGP-QinQ-AllVLAN

    • Ethernet service for M Series, MX Series, and ACX Series routers
    • Gigabit Ethernet interface
    • Q-in-Q endpoint interface type
    • Transport all traffic
    • Flexible-ethernet-services physical encapsulation type
    • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

    Eline-BGP-Dot1q-SingleVLAN

    • Ethernet service for M Series, MX Series, and ACX Series routers
    • Gigabit Ethernet interface
    • 802.1Q endpoint interface types
    • Single VLAN traffic
    • Flexible-ethernet-services physical encapsulation type
    • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-BGP-Port-Based

    • Ethernet service for M Series, MX Series, and ACX routers
    • Gigabit Ethernet interface
    • Port-based UNIs
    • Ethernet-ccc physical encapsulation type
    • Rate limit from 10 Mbps to 100 Mbps with 10 Mbps increment

    ELine-Dot1q-SingleVLAN Service Definition

    This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
          flexible-vlan-tagging;
          mtu 1522;
          encapsulation flexible-ethernet-services;
          unit 1 {
            description "Dot1q Eline Martini ";
            encapsulation vlan-ccc;
            vlan-id 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }
            }
        }
    }
    
    firewall {
       policer policer_in_ge-0/1/1_1 {
        if-exceeding {
            bandwidth-limit 100m;
            burst-size-limit 62500000;
        }               
        then discard;   
    } 
    
    family ccc {    
     filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
    
    protocols {
        l2circuit {
           neighbor 192.168.1.40
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
          flexible-vlan-tagging;
          mtu 1522;
          encapsulation flexible-ethernet-services;
          unit 1 {
            description "Dot1q Eline Martini ";
            encapsulation vlan-ccc;
            vlan-id 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }
            }
        }
    }
    
    
    firewall {
       policer policer_in_ge-0/1/1_1 {
        if-exceeding {
            bandwidth-limit 100m;
            burst-size-limit 62500000;
        }               
        then discard;   
    } 
    
    family ccc {    
     filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
    
    protocols {
        l2circuit {
           neighbor 192.168.1.30 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
    }
    

    ELine-Dot1q-SingleVLAN-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 { 
         flexible-vlan-tagging;
         mtu 1522;
         encapsulation vlan-ccc;
         unit 513 {
            description VLANCCC-SR;
            encapsulation vlan-ccc;
            vlan-id 513;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_513;
                }
            }
        }
    }
    
    firewall {
        policer policer_in_ge-0/1/1_513 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_513 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_513;
                        accept;
                    }
                }
            }
        }
    }
    
    protocols {
        l2circuit {     
            neighbor 192.168.1.40 {
                interface ge-0/1/1.513 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
    
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

     ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation vlan-ccc;
        unit 513 {
            description VLANCCC-SR;
            encapsulation vlan-ccc;
            vlan-id 513;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_513;
                }
            }
        }
    }
    
    firewall {
        policer policer_in_ge-0/1/1_513 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_513 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_513;
                        accept;
                    }
                }
            }
        }
    }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.513 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-Dot1q-SingleVLAN-Ext-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport a single VLAN across an LDP or BGP network core using 802.1Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation extended-vlan-ccc;
        unit 1 {
            description Extended-SR;
            vlan-id 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }
            }
        }           
    }               
    
    
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
        }
    }   
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation extended-vlan-ccc;
        unit 1 {
            description Extended-SR;
            vlan-id 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }
            }
        }
    }
    
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }           
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
        }
    } 
    
    protocols {
       l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-PortBased Service Definition

    This service definition provides a base for creating point-to-point services that transport all traffic across an LDP or BGP network core using an entire port at each endpoint using ethernet-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps to 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
        encapsulation ethernet-ccc;
        unit 0 {
            family ccc {
                filter {
                    input filter_in_ge-0/1/1;
                }
            }
        }
    }
    
    firewall {
        policer policer_in_ge-0/1/1 {
            if-exceeding {
                bandwidth-limit 10m;
                burst-size-limit 6250000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1;
                        accept;
                    }
                }
            }
        }
    }
      
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {     
                interface ge-0/1/1.0 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
            encapsulation ethernet-ccc;
            unit 0 {
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1;
                    }
                }
            }
        }
    
    firewall {
        policer policer_in_ge-0/1/1 {
            if-exceeding {
                bandwidth-limit 10m;
                burst-size-limit 6250000;
            }
            then discard;
        }
        family ccc {           
            filter filter_in_ge-0/1/1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1;
                        accept;
                    }
                }
            }
        }
    }      
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.0 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-QinQ-AllVLAN Service Definition

    This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

     ge-0/1/1 {           
          flexible-vlan-tagging;
          mtu 1522;
          encapsulation flexible-ethernet-services;
          unit 1 {
            description "AllVlanTransport";
            encapsulation vlan-ccc;
            vlan-tags outer 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }
            }
        }
    
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
    
    }
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;
        unit 1 {
            description "AllVlanTransport";
            encapsulation vlan-ccc;
            vlan-tags outer 1;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_1;
                }   
            }       
        }           
    }
     
    
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }           
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
        }
    }
    
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }       
            }
        }
    }
    

    ELine-QinQ-AllVLAN-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
            flexible-vlan-tagging;
            mtu 1522;
            encapsulation vlan-ccc;
            unit 515 {  
                description QinQ-ALLVLAN;
                encapsulation vlan-ccc;
                vlan-tags outer 515;
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1_515;
                    }
                }
            }
        }
    
    firewall {
        policer policer_in_ge-0/1/1_515 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
    
        family ccc {
            filter filter_in_ge-0/1/1_515 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_515;
                        accept;
                    }
                }
            }
        }
    }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.515 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }   
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation vlan-ccc;
        unit 515 {
            description QinQ-ALLVLAN;
            encapsulation vlan-ccc;
            vlan-tags outer 515;
            family ccc {
                filter {
                     input filter_in_ge-0/1/1_515;
                }   
            }
        }
    }
    
    firewall {
        policer policer_in_ge-0/1/1_515 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {    
            filter filter_in_ge-0/1/1_515 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_515;
                        accept;
                    }
                }
            }
        }
    }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.515 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }   
        }
    }
    
    

    ELine-QinQ-AllVLAN-Ext-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport all customer traffic across an LDP or BGP network core using Q-in-Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
            flexible-vlan-tagging;
            mtu 1522;
            encapsulation extended-vlan-ccc;
            unit 1 {
                description Ext-AllVLAN;
                vlan-tags outer 1;
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1_1;
                    }
                }       
            }           
        }               
    
    
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }               
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
        }
    
    }
    
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
    
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
            flexible-vlan-tagging;
            mtu 1522;
            encapsulation extended-vlan-ccc;
            unit 1 {
                description Ext-AllVLAN;
                vlan-tags outer 1;
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1_1;
                    }
                }
            }
        }
    
    firewall {
        policer policer_in_ge-0/1/1_1 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }               
        family ccc {
            filter filter_in_ge-0/1/1_1 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_1;
                        accept;
                    }
                }
            }
        }
    }
        
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {     
                interface ge-0/1/1.1 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-QinQ-VLANRange Service Definition

    This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and flexible-ethernet-services as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {                                    
           flexible-vlan-tagging;
           mtu 1522;
           encapsulation flexible-ethernet-services;
             unit 2 {
             description "QinQ Eline Martini";
             encapsulation vlan-ccc;
             vlan-tags outer 2 inner-range 100-110;
             family ccc {
                filter {
                    input filter_in_ge-0/1/1_2;
                }
            }
        }
    }
    
    
    firewall {
    policer policer_in_ge-0/1/1_2 {
        if-exceeding {
            bandwidth-limit 100m;
            burst-size-limit 62500000;
        }
    
    family ccc {
        filter filter_in_ge-0/1/1_2 {
            interface-specific;
            term 1 {
                then {
                    policer policer_in_ge-0/1/1_2;
                    accept;
                }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.2 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
            
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;
        unit 2 {
            description "QinQ Eline Martini";
            encapsulation vlan-ccc;
            vlan-tags outer 2 inner-range 100-110;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_2;
                }
            }
        }
    }
    
    
    
    firewall {
        policer policer_in_ge-0/1/1_2 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
    
        family ccc {
            filter filter_in_ge-0/1/1_2 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_2;
                        accept;
                    }   
                }
            }
        }
    }
    
    
    protocols {
        l2circuit {     
                interface ge-0/1/1.2 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-QinQ-VLANRange-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

        ge-0/1/1 {
            flexible-vlan-tagging;
            mtu 1522;
            encapsulation vlan-ccc;
            unit 514 {
                description VLANRANGE-SR;
                encapsulation vlan-ccc;
                vlan-tags outer 514 inner-range 600-610;
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1_514;
                    }
                }
            }
        }
    
    firewall {
        policer policer_in_ge-0/1/1_514 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_514 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_514;
                        accept;
                    }   
                }
            }
        }
    }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.40 {
                interface ge-0/1/1.514 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
    
            }
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

     ge-0/1/1 {
            flexible-vlan-tagging;
            mtu 1522;
            encapsulation vlan-ccc;
            unit 514 {
                description VLANRANGE-SR;
                encapsulation vlan-ccc;
                vlan-tags outer 514 inner-range 600-610;
                family ccc {
                    filter {
                        input filter_in_ge-0/1/1_514;
                    }
                }
            }
        }
    
    
    firewall {
        policer policer_in_ge-0/1/1_514 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_514 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_514;
                        accept;
                    }
                }
            }
        }
    }
    
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.514 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                }
            }
        }
    }
    

    ELine-QinQ-VLANRange-Ext-CCC Service Definition

    This service definition provides a base for creating point-to-point services that transport a range of VLANs across an LDP or BGP network core using Q-in-Q endpoint interface types and extended-vlan-ccc as the physical encapsulation type. Service provisioners can limit the bandwidth of services built from this service definition to specific values from 10 Mbps through 100 Mbps.

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation extended-vlan-ccc;
        unit 2 {    
            description Ext-VLANRange;
            vlan-tags outer 2 inner-range 100-110;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_2;
                }   
            }       
        }           
    }   
    
    
    
    firewall {          
        policer policer_in_ge-0/1/1_2 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }
        family ccc {
            filter filter_in_ge-0/1/1_2 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_2;
                        accept;
                    }
                }
            }
        }
    }     
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.2 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                 }
             }
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    ge-0/1/1 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation extended-vlan-ccc;
        unit 2 {
            description Ext-VLANRange;
            vlan-tags outer 2 inner-range 100-110;
            family ccc {
                filter {
                    input filter_in_ge-0/1/1_2;
                }   
            }
        }
    } 
    
    firewall {
        policer policer_in_ge-0/1/1_2 {
            if-exceeding {
                bandwidth-limit 100m;
                burst-size-limit 62500000;
            }
            then discard;
        }               
        family ccc {
            filter filter_in_ge-0/1/1_2 {
                interface-specific;
                term 1 {
                    then {
                        policer policer_in_ge-0/1/1_2;
                        accept;
                    }
                }
            }
        }
    }
    
    protocols {
        l2circuit {
            neighbor 192.168.1.30 {
                interface ge-0/1/1.2 {
                    virtual-circuit-id 786;
                    no-control-word;
                    mtu 1522;
                 }
             }
        }
    }
    

    ELine-BGP-Port-Based

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    routing-instances{
        instance-type l2vpn;
        interface ge-1/0/7.0;
        route-distinguisher 69:27;
        vrf-target target:69:49165;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_1 {
                    site-identifier 1;
                    mtu 1522;
                    interface ge-1/0/7.0 {
                       remote-site-id 2;
                       description P2P-BGP-PortBased;
                   }
               }
            }
        }
    }
    
    ge-1/0/7 {
        mtu 1522;
        encapsulation ethernet-ccc;
        unit 0 {
            family ccc {
                filter {
                    input filter_in_ge-1/0/7;
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-1/0/7 {
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-1/0/7;
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-1/0/7 {
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    routing-instances{
        instance-type l2vpn;
        interface ge-1/0/8.0;
        route-distinguisher 69:27;
        vrf-target target:69:49165;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_2 {
                    site-identifier 2;
                    mtu 1522;
                    interface ge-1/0/8.0 {
                       remote-site-id 1;
                       description P2P-BGP-PortBased;
                   }
               }
            }
        }
    }
    
    ge-1/0/8 {
        mtu 1522;
        encapsulation ethernet-ccc;
        unit 0 {
            family ccc {
                filter {
                    input filter_in_ge-1/0/8;
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-1/0/8 {
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-1/0/8;
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-1/0/8 {
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    

    Eline-BGP-Dot1q-SingleVLAN

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    routing-instances {
        instance-type l2vpn;
        interface ge-0/0/2.823;
        route-distinguisher 69:26;
        vrf-target target:69:49164;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_1 {
                    site-identifier 1;
                    interface ge-0/0/2.823 {
                        remote-site-id 2;
                    }
                }
            }
        }
    }
    
    ge-0/0/2 {
        enable;
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;
        unit 823 {
            description "ELine-BGP-Dot1Q";
            encapsulation vlan-ccc;
            vlan-id 823;
            family ccc {
                filter {
                    input filter_in_ge-0/0/2_823;
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-0/0/2_823 {
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-0/0/2_823;
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-0/0/2_823 {
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    routing-instances {
        instance-type l2vpn;
        interface ge-0/0/3.823;
        route-distinguisher 69:26;
        vrf-target target:69:49164;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_2 {
                    site-identifier 2;
                    interface ge-0/0/3.823 {
                        remote-site-id 1;
                    }
                }
            }
        }
    }
    
    ge-0/0/3 {
        enable;
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;
        unit 823 {
            description "ELine-BGP-Dot1Q";
            encapsulation vlan-ccc;
            vlan-id 823;
            family ccc {
                filter {
                    input filter_in_ge-0/0/3_823;
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-0/0/3_823 {
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-0/0/3_823;
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-0/0/3_823 {
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    

    Eline-BGP-QinQ-AllVLAN

    The following sections show the configuration data on each endpoint when you use this service definition to create the service shown in Figure 1:

    Configuration on Endpoint A

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint A:

    routing-instances {
        instance-type l2vpn;
        interface ge-0/0/1.981;
        route-distinguisher 69:15;
        vrf-target target:69:49160;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_1 {
                    site-identifier 1;
                    mtu 1522;
                    interface ge-0/0/1.981 {
                        remote-site-id 2;
                        description P2P-BGP-QnQAllVLan;
                    }
                }
            }
        }
    }
    
    
    ge-0/0/3 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;    
        unit 981 {
            description "No description available for selected UNI interface.";
            encapsulation vlan-ccc;
            vlan-tags outer 981;
            family ccc {
                filter {
                    input filter_in_ge-0/0/3_981;
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-0/0/3_981;{
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-0/0/3_981;
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-0/0/3_981;{
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    

    Configuration on Endpoint Z

    The following statements show the interface configuration, the filter configuration, and connectivity configuration on endpoint Z:

    routing-instances {
        instance-type l2vpn;
        interface ge-0/0/5.981;
        route-distinguisher 69:15;
        vrf-target target:69:49160;
        protocols {
            l2vpn {
                encapsulation-type ethernet-vlan;
                no-control-word;
                site L2VPN_Site_2 {
                    site-identifier 2;
                    mtu 1522;
                    interface ge-0/0/5.981 {
                        remote-site-id 1;
                        description P2P-BGP-QnQAllVLan;
                    }
                }
            }
        }
    }
    
    
    ge-0/0/5 {
        flexible-vlan-tagging;
        mtu 1522;
        encapsulation flexible-ethernet-services;    
        unit 981 {
            description "No description available for selected UNI interface.";
            encapsulation vlan-ccc;
            vlan-tags outer 981;
            family ccc {
                filter {
                    input filter_in_ge-0/0/5.981 
                }
            }
        }
    }
    
    firewall{
    
        family ccc {
    
           filter filter_in_ge-0/0/5.981 {
               interface-specific;
                term 1 {
                   then {
                       policer policer_in_ge-0/0/5.981 
                       accept;
                   }
               }
            }
        }
        policer policer_in_ge-0/0/5.981 {
        	if-exceeding {
                bandwidth-limit 10m;
    	    burst-size-limit 15220;
    	}
    	then discard;
        }
    }
    
     

    Related Documentation

     

    Modified: 2017-02-02