Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Changes in Default Behavior

  • From Release 16.1R3 onward, if an error occurs when you specify a device for the Stage Script, Execute Script, or Remove Script operation through a CSV file, Junos Space Network Management Platform returns one of the following error messages on the Job Results page:
    • Device is down, when the specified device is not available.
    • Script is already staged, when the script is already staged on the selected device and if you have not selected the Force Stage option.
    • Script is not staged on the device, when you attempt to execute a script on a device that does not have the script staged on it.
    • Script is disabled on the device, when you try to execute a script that is disabled on the specified device.
    • Selected script version does not match with the staged script version on the device, when you try to execute a version of the script other than the one staged on the device.
    • Adapter device does not support Local Script Execution, when you try to execute local scripts on wwAdapter devices.
  • From Junos Space Platform Release 16.1R3 onward, a new column, OOB Changes, is added on the Resolve OOB Changes Job Details page. The OOB Changes column contains a View link that enables you to view the details of the out-of-band changes.
  • From Junos Space Platform Release 16.1R3 onward, a script or configlet upload job is successful even if the uploaded content contained objects that are the same as the already-uploaded objects. In Junos Space Platform releases earlier than Release 16.1R3, the script or configlet upload fails if the upload contains already-uploaded content without any change.
  • From Release 16.1R3 onward, for remote database backup, Junos Space Platform supports remote usernames that contain hyphens.
  • From Release 16.1R3 onward, Junos Space Platform disables the Network Monitoring check box in the Content Options section of the Database Backup page when you disable the Network Monitoring service.
  • From Release 16.1R3 onward, Junos Space Platform provides a Copy button in the Compare Config Result page of the Compare Template Against Device job to help you copy commands without the line numbers.
  • From Release 16.1R3 onward, Junos Space Platform removes script associations from devices that are put in RMA state if you do not select the Update Device Config. from Space check box when you reactivate the device from RMA. If you select the Update Device Config. from Space check box when you reactivate a device from RMA, Junos Space Platform stages the script to the device while reactivating the device from RMA.
  • From Junos Space Platform Release 16.1R2 onward, validation messages are provided for tasks where CSV files are used for device selection, and all devices that are listed in the CSV file are not selected when the task is performed. Validation messages are provided when devices are selected using CSV files from the following pages and dialog boxes:
    • Deploy Device Image dialog box
    • Deploy Satellite Device Image dialog box
    • Stage Image on Device page
    • Stage Image on Satellite Device page
    • Remove Image from Staged Device dialog box
    • Undeploy JAM Package from Device dialog box
    • Verifying checksum of image on device(s) dialog box
    • Stage Scripts on Device(s) page
    • Enable Scripts on Device(s) page
    • Disable Scripts on Device(s) page
    • Execute Script on Device(s) page
    • Remove Scripts from Device(s) dialog box
    • Verify Checksum of Scripts on Device(s) dialog box
  • From Junos Space Platform Release 16.1R1 onward, the minimum hard disk requirement for deploying a virtual appliance on a VMware ESX or ESXi server is increased from 133 GB to 250 GB.
  • From Junos Space Platform Release 15.2R2 onward, Internet Explorer version 8.0 is no longer supported. Although you can access Junos Space Platform by using Internet Explorer versions 9.0 and 10.0, we recommend that you upgrade to Internet Explorer version 11.0 because it is the only version now supported by Microsoft. For more information, see https://www.microsoft.com/en-in/WindowsForBusiness/End-of-IE-support.
  • From Junos Space Platform Release 15.1R1 onward, the accept-type for the ASYNC API ("/api/space/device-management/discover-devices?queue-url=https://
    {Server.ip}/api/hornet-q/queues/jms.queue.{Queue}"
    ) is changed to "application/vnd.net.juniper.space.job-management.task+xml;version=1".
  • From Junos Space Platform Release 15.1R1 onward, the Add SNMP configuration to device field on the Modify Application Settings page (Administration > Applications > Network Management Platform > Modify Application Setting) is renamed Add SNMP configuration to device for fault monitoring.
  • From Junos Space Platform Release 15.1R1 onward, auto-resynchronization jobs are not displayed on the Job Management page. These jobs run in the background and cannot be canceled from the Junos Space UI. You can view the status of auto-resynchronization jobs from the Managed Status column on the Device Management page or from the Device Count by Synchronization State widget on the Devices page. You can collect more information about these jobs from the server.log and autoresync.log files in the /var/log/jboss/servers/server1/ directory.

Modified: 2017-09-18