Viewing the Device Inventory Page
The Device Inventory page lists devices managed by Network Director and provides basic information about the devices, such as IP address and current operating status. The Device Inventory page is available in Build and Deploy mode and is the default landing page for Build mode.
The scope you have selected in the View pane and the network view that you have selected from the View selector determines which devices are listed in the Device Inventory page. For example:
If you are in the Logical View and select My Network, all devices managed by Network Director are listed.
If you are in the Datacenter View and select Network Devices under a data center, only the network devices that are part of that data center are displayed.
If you select a building in Location view, only those devices assigned to that building (including the floors and closets in the building) are listed.
The Device Inventory page provides three pie charts that summarize the status of the devices in your selected scope:
Devices by Family—Indicates the proportion of devices in each device family.
Connection State—Shows the proportion of devices that are up or down. In this chart, Virtual Chassis count as one device.
Configuration State—Shows the proportion of devices in each configuration state. See the Config State entry in Table 1 for definitions of the configuration states.
Mouse over a pie segment to view the actual number of devices and the percentage represented by that pie segment.
Table 1 describes the fields in the Device Inventory table.
Table 1: Fields in the Device Inventory Table
Configured name of the device or IP address if no hostname is configured.
IP Address of the device.
Serial number of device chassis.
Model number of the device.
Operating system version running on the device.
Device family of the device:
Type of the device:
Connection status of the device in Network Director:
Displays the configuration status of the device:
Displays if the device is directly manageable or not.
This is a hidden field. To display the Manageability State field, click any column, click the down arrow to expand the list, select Columns from the list, and then enable Manageability State.
Juniper Networks devices require a license to activate the feature. To understand more about Network Director Licenses, see, Viewing Licenses With Network Director.