Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

VC Equipment Summary By Type Monitor

 

The VC Equipment Summary By Type displays the operational status of the virtual chassis members associated with Logical View, Location View, Device View and Custom Group View.

VC Equipment Summary By Type

The summary view of the VC Equipment Summary By Type monitor shows the total number of virtual chassis members and the connection status of the virtual chassis members in the selected scope.

Note

The VC Equipment Summary tab is enabled only for members that are at the virtual chassis container level, virtual chassis level or virtual chassis device level in the applicable view panes.

Mouse over a segment of the pie chart to see the actual number of VC devices of that type. The connection states are as follows:

  • UP (green)—Device is connected to Network Director

  • DOWN (red)—Device is not connected to Network Director

Click the details icon to open the VC Equipment Member Status By Type Detail View window.

VC Equipment Member Status By Type Details

The VC Equipment Member Status By Type Detail View window provides details about the VC members in the selected scope. See Table 1 for the description of the table columns.

Table 1: VC Equipment Member Status By Type Detail View

Table Column

Description

Hostname

Configured name of the device or IP address if no hostname is configured.

IP Address

IP Address of the device.

Serial Number

Serial number of device chassis.

Platform

Model number of the device.

OS Version

Operating system version running on the device.

Device Family

Device family of the device:

  • JUNOS-EX for EX Series switches

  • JUNOS for Campus Switching ELS

Device Type

Type of the device:

  • VC—Virtual Chassis master

  • VC Member—Virtual Chassis member switch

Connection State

Connection status of the device in Network Director.

  • UP (green up arrow)—Device is connected to Network Director

  • DOWN (red down arrow)—Device is not connected to Network Director

Configuration State

Displays the configuration status of the device:

  • In Sync—The configuration on the device is in sync with the Network Director configuration for the device.

  • Out Of Sync—The configuration on the device does not match the Network Director configuration for the device. This state is usually the result of the device configuration being altered outside of Network Director.

    You cannot deploy configuration on a device from Network Director when the device is Out Of Sync. To resolve this state, use the Resynchronize Device Configuration task in Deploy mode

  • Sync failed—An attempt to resynchronize an Out Of Sync device failed.

  • Synchronizing—The device configuration is in the process of being resynchronized

  • N/A—The device is down or is an access point.