Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

AP Status Monitor

 

The AP Status monitor displays status information about all access points that belong to the selected node. It is found on the Equipment tab in Monitor mode.

The default view of the summary shows four of the eight available fields that you can configure to be shown or hidden. The details page shows an expanded version with all of the fields, which can also be tailored.

This monitor currently displays for the top wireless node and for wireless LAN controller nodes. If, for example, you select Wireless Network node, it shows global status information for all access points. If you select a wireless LAN controller, it shows status information for the access points belonging to the controller.

Table 1 describes the fields that are available in both the summary and detail view of the AP Status monitor. Fields that are available, but hidden, are also displayed.

Table 1: AP Status Monitor Fields

Field

Description

Summary, Detailed, or Hidden View

AP Name

Name of the access point.

Summary

Serial Number

Serial number of the access point.

Summary

Model

The model number of the access point.

Summary (hidden)

Detailed

IP Address

The IP address assigned to the AP.

Summary (hidden)

Detailed

Status

Operational status of the access point:

  • Down—The access point is offline.

  • Up—The access point is online and enabled.

  • Up Redundant—The access point is online, reporting to this controller as redundant and another controller as primary.

Summary

Uptime

The length of time since the access point last booted.

Summary

Version

The version of the Mobility System Software (MSS) running on the access point.

Summary (hidden)

Detailed

Primary Controller

The primary controller for the access point.

Detailed

Secondary Controller

The secondary controller for the access point.

Detailed

Location

Location of the access point.

Summary (hidden)

Detailed