Assigning the MACsec Profiles

Assigning a MACsec Profile to a Device

You can assign a MACsec profile to extended ports of satellite devices only and not to the native ports on the aggregation devices. Therefore, the tree view shows only the satellite devices (standalone and that are part of the cluster) to which you can assign a profile.

1. Click in the Network Director banner.
2. Under Select View, select one of the following views: Logical View, Location View, Device View or Custom Group.Tip

   Do not select Datacenter View or Topology View.

3. In the Tasks pane, select Wired > Profiles > MACsec.

   The Manage MACsec Profile page is displayed.

4. Select the MACsec profile that you want to assign and then click Assign.

   The Assign MACsec profile page appears displaying a list of Junos Fusion Enterprise devices managed by Network Director.

Editing the MACsec Profile Assignments

Use the Edit Assignments page to change MACsec profile assignments. To edit an existing assignment:

1. Select a profile from the Manage MACsec Profile Settings page and click Edit Assignment.

   The Edit Assignments page for the selected device appears.

2. Expand the Devices cabinet and make the desired change from the Operation column of the table.
3. Click Apply once you are done with the changes.

   The Manage MACsec Profile page is displayed.