AP Status Monitor
The AP Status monitor displays status information about all access points that belong to the selected node. It is found on the Equipment tab in Monitor mode.
The default view of the summary shows four of the eight available fields that you can configure to be shown or hidden. The details page shows an expanded version with all of the fields, which can also be tailored.
This monitor currently displays for the top wireless node and for wireless LAN controller nodes. If, for example, you select Wireless Network node, it shows global status information for all access points. If you select a wireless LAN controller, it shows status information for the access points belonging to the controller.
Table 1 describes the fields that are available in both the summary and detail view of the AP Status monitor. Fields that are available, but hidden, are also displayed.
Table 1: AP Status Monitor Fields
Summary, Detailed, or Hidden View
Name of the access point.
Serial number of the access point.
The model number of the access point.
The IP address assigned to the AP.
Operational status of the access point:
The length of time since the access point last booted.
The version of the Mobility System Software (MSS) running on the access point.
The primary controller for the access point.
The secondary controller for the access point.
Location of the access point.