Understanding Deploy Mode in Network Director
The Deploy mode enables you to deploy configuration changes and software upgrades to devices and perform several device management and configuration file management tasks.
Deploy mode is disabled for devices in your Datacenter View. This is because you can only discover, manage, and monitor devices in your virtual network. None of the deploy mode tasks are applicable to these devices.
This topic describes:
Deploying Configuration Changes
When you make configuration changes in Build mode, the changes are not deployed to devices automatically. You must manually deploy the changes to devices in Deploy mode. Every time you make configuration changes in Build mode that affect a device, the device is automatically added to the list of devices with pending changes.
The device is added to the list of devices with pending changes only when you make the device configuration changes. If you make changes to the configurations (associated with the device) that are specific only to Network Director the device is not listed with pending changes. For example, when you make changes to the profile name associated with the device, the device is not added to the list of devices with pending changes.
Configuration changes are deployed to devices at the device level. When you deploy configuration changes to a device, all pending configuration changes for that device are deployed.
You can deploy the device configurations in the following two ways:
Auto Approval—In this mode, the device configuration changes are approved automatically by the system and do not require explicit (manual) approval by a configuration approver before they can be deployed. This is the default approval mode.
Manual Approval—In this mode, the device configuration changes are required to be explicitly approved by a configuration approver before the changes can be deployed to the device.
For more information about enabling these modes, see Setting Up User and System Preferences.
For manual approval, the Network Director - Configuration Approver role is available in Junos Space, which is specific to the Network Director. A user with this role reviews device configurations and proposed changes to device configurations and can either approve or reject them.
An operator performs device configurations and creates a change request for that configuration and submits it for approval to an approver. The approvers are notified by e-mail whenever a change request is created. If a configuration or a change to it is approved by an approver, then the operator is able to deploy it. If a configuration is rejected then the operator must make the necessary changes, resubmit the change request, and procure an approval before the configuration can be deployed. For more information, see Approving Change Requests
You can specify any number of approvers. If you specify more than one approver while configuring the Manual Approval mode, once an approver accepts or rejects the proposed change, the change request is not listed for the other approvers and they cannot approve or reject the same change request.
You can do the following configuration deployment tasks on devices that have pending changes:
Run configuration deployment jobs immediately or schedule them for future times.
Approve the change requests for pending configurations, if you have selected the Manual Approval mode.
Preview pending configuration changes before deploying the changes.
Validate that the pending changes are compatible with the device’s configuration.
Manage configuration deployment jobs.
Configuration changes are validated for each device both in Network Director and on the device. If any part of a configuration change for a device fails validation, no configuration changes are deployed to the device. You can see the results of each validation phase separately.
Network Director will not deploy configuration to a device with a configuration that is out of sync (meaning that the device’s configuration differs from Network Director’s version of that device’s configuration), or to a device that has uncommitted changes to its candidate configuration. Deployment to such devices will fail.
When you schedule a deployment job, that job and any profiles and devices assigned to that job are locked within Network Director. You cannot edit the job or any of its assigned profiles until the job runs or gets cancelled. This locking feature prevents you from deploying unintended configuration changes that could result from editing profiles and devices that are already scheduled to deploy. To change any properties of a scheduled job, cancel the job and create a new scheduled job with the desired properties. You cannot edit the profile assignments of a device that has scheduled pending configuration changes.
Managing Software Images
Network Director can manage software images on the nodes it manages. You can do the following software image management tasks:
Deploy a software image stored in an image repository on the Network Director server to multiple devices with a single job.
Track the status of software image management jobs.
Stage and install software images as separate tasks.
Schedule staging and installation to happen at independent future times.
Perform several software image upgrade options, such as rebooting devices automatically after the upgrade finishes.
Using nonstop software upgrade (NSSU) to upgrade EX Series switches is supported in Network Director.
Zero Touch Provisioning
Zero touch provisioning enables you to provision new Juniper Networks switches in your network automatically—without manual intervention. When you physically connect a switch to a network and boot it with the factory-default configuration, the switch attempts to upgrade the Junos OS software automatically and autoinstall a configuration file from the network.
In Deploy mode you can perform several device management tasks, including:
View the device inventory.
Show a device’s current configuration.
Resynchronize the device configuration maintained in Build mode with the configuration on the device. For more information about resynchronization of device configuration, see Understanding Resynchronization of Device Configuration
Convert access points that were added to a controller using an Auto AP profile configuration to a persistent access point configuration on the controller.
Enable or disable switch network ports.
Manage QFabric node groups.
Convert QSFP+ port configuation.
Managing Device Configuration Files
You can back up device configuration files to the Network Director server. You can perform several actions on backed up configuration files, such as restoring configuration files to devices, and viewing and comparing configuration files.
Managing Baseline Configuration
You can create a baseline of the Network Director device configuration and the OS version on the Network Director server. You can perform several actions on the baseline configuration files, such as restoring configuration files to devices, and viewing and comparing configuration files.
Viewing a Device's Current Configuration from Network Director
Converting Automatically Discovered Access Points to Manually Configured Access Points