Monitoring Junos Fusion Fabric Systems and Components

This topic describes how to monitor Junos Fabric systems and their components, and which Junos Fusion-specific monitors are available.

To monitor a Junos Fusion system or its components:

Click Monitor in the Network Director banner.
Select the fabric container or a specific Junos Fusion fabric that you want to monitor in the View pane.
The tabs and monitors that are available depends on your selection.
Note
You cannot select the Aggregation Device or Satellite Device nodes within a fusion fabric in the View pane. To monitor a fabric, select the fusion fabric parent node.
To get information about a monitor, click the Help button in its title bar, or refer to Table 1 for information about the Junos Fusion-specific monitors that are available for each node type.

Table 1: Monitors Available for Junos Fusion Systems and Components

Selection in the View Pane	Monitoring Tab	Available Junos Fusion-Specific Monitors
Junos Fusion system	Summary	Equipment Summary By Type Monitor Port Status Monitor Current Active Alarms Monitor
	Traffic	Unicast vs Broadcast/Multicast Monitor Unicast vs Broadcast/Multicast Trend Monitor Traffic Trend Monitor Error Trend Monitor
	Equipment	Status Monitor for Junos Fusion Systems Port Status Monitor
Fabrics node	Summary	Equipment Summary By Type Monitor Port Status Monitor Current Active Alarms Monitor