Rogue Summary Report
The Rogue Summary report is a standardized report generated in Network Director to show a summary of rogue device distribution on the network and distribution of rogue devices by SSID. Rogue devices can be a security threat by allowing unauthorized access to the network and prompt action is required to remove the potential threat. The applicable scope for this report is My Network.
There are two portions of the report: a report header and the report body. The contents of the report header are described in Table 1.
Table 1: Rogue Summary Report Header
NETWORK DIRECTOR REPORT:
The type of report; in this case, the Rogue Summary report.
The date and time the report ran. The date format is: [Day of the Month] [Month] [Year]. The time format follows the Coordinated Universal Time (UTC). For example: 07 December 2013 11:35 PM PST.
The username of the user that generated the report.
The name of the report assigned when the report was created.
The report is generated from this view and node in the network.
Shows any filters that were applied to the report definition. Only results that match the filters are included in the report.
The report body contains information about the rogue devices detected on the network. It contains these sections:
Summary—Shows information about all the rogue devices included in the report.
Distribution by Switch—Shows the distribution of rogue devices by switch.
Distribution by SSID—Shows the distribution of rogue devices by SSID.
List by SSID—Shows the rogue devices detected in each SSID, identified by MAC address.