Status Monitor for Layer 3 Fabrics
The Status monitor for Layer 3 Fabrics provides key information about the status of equipment in a Layer 3 Fabric and is available on the Equipment tab in Monitor mode.
Table 1 describes the fields in this monitor.
Table 1: Status Monitor for Layer 3 Fabric Fields
Power Supply Status
Indicates the aggregated power supply status for devices in the Layer 3 Fabric. Power supplies are categorized as absent, OK, check, or failed and the number of power supplies in each category are given.
Indicates the aggregated fan status for devices in the Layer 3 Fabric. Fans are categorized as absent, OK, check, or failed and the number of fans in each are given.
Used MAC Addresses
Indicates the number of MAC addresses in use in the Layer 3 Fabric.
Indicates the number of VLANs in use in the Layer 3 Fabric.
Indicates the number of devices in the Layer 3 Fabric that are up and that are down.
Alarm Severity Status
Displays the highest severity of any alarms active on any device in the Layer 3 Fabric and the number of alarms at that severity level.