Device Inventory Report
The Device Inventory report is a standardized report generated in Network Director to show all devices that are visible to Network Director. There are two portions of the report: a report header and the report body. The contents of the report header are found in Table 1.
Table 1: Device Inventory Report Header
NETWORK DIRECTOR REPORT:
The type of report; In this case, the Device Inventory report.
The date and time the report ran. The date format is: [Day of the Month] [Month] [Year]. The time format follows the Coordinated Universal Time (UTC). For example: 07 December 2012 11:35 PM PST
The username of the user that generated the report.
The name of the report assigned by the user when the report was created.
The report is generated from this view and node in the network.
The report specified these device and connection state filters.
Device Type—Supported device types are:
Connection State—Device connection states for filtering are:
The body of the report comprises:
Device Type Count, which is a pie chart that graphically represents the network composition. Each segment represents:
EX Series switches
Wireless LAN controllers
Wireless access points
Device Type Summary, which gives the total count of each type of device covered in the node.
Device details by logical groups.
Following the pie chart, details for each device segment are listed by device type. For descriptions of the device fields see Table 2.
Table 2: Inventory Report Fields
The device label.
Either the IPv4 or the IPv6 address.
Note: Not applicable for access points.
The full model number of the EX Series switch.
The Junos software version and release number.
The hardware serial number of the device.
The type of hardware, such as switches, controllers, or access points. Switches can also be designated as NORMAL for standalone or VC for Virtual Chassis.
The connection state of the switch.
The administrative or operational state of the device.