Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Launching the Aruba Airwave Application

    To manage Aruba wireless devices that are connected to Network Director, use the Aruba Airwave application. You can launch the Aruba Airwave application from within Network Director. The launch URL is specified under System Preferences.

    The Launch Aruba Airwave option under Device Management in the Build, Monitor, Fault, and Report modes opens the respective pages for Aruba Airwave application using which you can manage Aruba devices.

    This section describes:

    Launching the Aruba Airwave Application from Build Mode

    From Build mode, you can launch the Aruba Airwave application home page, which displays monitoring status and configuration compliance pie charts, number of users on the network during a period of time, and other details for all the Aruba wireless devices connected to Juniper Networks switches:

    1. Under Build mode, select Device Management and click Launch Aruba Airwave.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The Home > Overview page of the Aruba Airwave application opens.

    3. You can manage Aruba wireless devices by using this page.

    Launching the Aruba Airwave Application from Monitor Mode

    From Monitor mode, you can launch the Aruba Airwave application APs/Devices > List, which shows the assignment status and other details of all the Aruba wireless devices:

    1. Under Monitor mode, select Device Management and click Launch Aruba Airwave.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The APs/Devices > List page of the Aruba Airwave application opens, listing all the wireless devices connected to Juniper Networks switches.

    3. You can monitor Aruba wireless devices by using this page.

    Launching the Aruba Airwave Application from Fault Mode

    From Fault mode, you can launch the Aruba Airwave application System > Alerts page, which shows alerts and alert details for all the Aruba wireless devices:

    1. Under Fault mode, select Device Management and click Launch Aruba Airwave.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The System > Alerts page of the Aruba Airwave application opens, listing all the impacted wireless devices connected to Juniper Networks switches.

    3. You can view the alert summary and monitor alerts for the Aruba wireless devices.

    Launching the Aruba Airwave Application from Reports Mode

    From Reports mode, you can launch the Aruba Airwave application Reports > Generated to view and generate reports for the Aruba wireless devices:

    1. Under Reports, select Device Management and click Launch Aruba Airwave.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The Reports > Generated page opens in Aruba Airwave application.

    3. You can view reports that have been run, view the most recent daily version of the reports, and if you have the administrative privileges, rerun the reports if needed.

    Launching Aruba Airwave for an Individual Aruba Wireless Device or Device Group

    Apart from launching the Aruba Airwave pages for all the Aruba wireless devices, Network Director also has the ability to launch the Airwave application pages for an individual Aruba wireless device (access points and controllers) or devices in a group connected to Juniper Networks switches from within Network Director. By default, respective monitoring pages of Aruba Airwave application opens for the selected device and device group.

    You can navigate to device inventory table in the following modes and click on the device name or device group name in this table to launch the Aruba Airwave application:

    • Build mode—Select Device Management and click View Aruba Wireless Device Inventory
    • Monitor mode—Select Device Management and click View Aruba Wireless Devices
    • Fault mode—Select Device Management and click Impacted Aruba Wireless Devices

    To launch the Aruba Airwave application, which shows an individual Aruba access point details:

    1. Click the hostname entry under column Hostname in device inventory table.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The APs/Devices > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba access point.

    3. You can manage the selected Aruba access point by using this page.

    To launch the Aruba Airwave application, which shows an individual Aruba wireless LAN controller details:

    1. Click the controller name entry in the column Controller Name in device inventory table.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The APs/Devices > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba wireless LAN controller.

    3. You can manage the selected Aruba wireless LAN controller by using this page.

    To launch the Aruba Airwave application, which shows an individual Aruba wireless device group:

    1. Click the group name entry in the column Device Group in device inventory table.

      The Aruba Airwave application login page opens.

    2. Type the credentials in the Aruba Airwave application login page.

      The Groups > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba wireless device group.

    3. You can manage the selected device group by using this page.

    Modified: 2018-01-23