Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Radio Status Monitor

    The Radio Status monitor, on the Equipment tab in Monitor mode, provides information about the radios and access points being controlled at this node. For example if you select Wireless Network, information about all of the radios is displayed; if you select a wireless controller, then only information for the radios for that controller is shown. The monitor has a summary view and a detailed view. The default view is the summary, showing four of the six available fields. These fields in the Radio Status monitor are described in Table 1.

    Table 1: Radio Status Monitor Fields

    Field

    Description

    Summary, Detailed, or Hidden View

    Radio Identifier

    The system identification for the radio, composed of:

    • The access point name
    • A colon (:)
    • The radio number

    Summary
    Detailed

    MAC Address

    The radio MAC address.

    Summary (Hidden)
    Detailed

    Status

    Up (enabled), Down (disabled), or NA (unable to determine status).

    Summary
    Detailed

    Radio Type

    The type of wireless clients that can connect to the access point.

    Summary
    Detailed

    Channel

    The configured operating channel for AP communication.

    Summary
    Detailed

    Tx Power

    The transmit power level for a radio.

    Summary (Hidden)
    Detailed

    Modified: 2018-01-24