Launching the Aruba Airwave Application

Launching the Aruba Airwave Application from Build Mode

Procedure

1. Under Build mode, select Device Management and click Launch Aruba Airwave.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The Home > Overview page of the Aruba Airwave application opens.

3. You can manage Aruba wireless devices by using this page.

Launching the Aruba Airwave Application from Monitor Mode

Procedure

1. Under Monitor mode, select Device Management and click Launch Aruba Airwave.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The APs/Devices > List page of the Aruba Airwave application opens, listing all the wireless devices connected to Juniper Networks switches.

3. You can monitor Aruba wireless devices by using this page.

Launching the Aruba Airwave Application from Fault Mode

Procedure

1. Under Fault mode, select Device Management and click Launch Aruba Airwave.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The System > Alerts page of the Aruba Airwave application opens, listing all the impacted wireless devices connected to Juniper Networks switches.

3. You can view the alert summary and monitor alerts for the Aruba wireless devices.

Launching the Aruba Airwave Application from Reports Mode

Procedure

1. Under Reports, select Device Management and click Launch Aruba Airwave.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The Reports > Generated page opens in Aruba Airwave application.

3. You can view reports that have been run, view the most recent daily version of the reports, and if you have the administrative privileges, rerun the reports if needed.

Launching Aruba Airwave for an Individual Aruba Wireless Device or Device Group

Apart from launching the Aruba Airwave pages for all the Aruba wireless devices, Network Director also has the ability to launch the Airwave application pages for an individual Aruba wireless device (access points and controllers) or devices in a group connected to Juniper Networks switches from within Network Director. By default, respective monitoring pages of Aruba Airwave application opens for the selected device and device group.

You can navigate to device inventory table in the following modes and click on the device name or device group name in this table to launch the Aruba Airwave application:

• Build mode—Select Device Management and click View Aruba Wireless Device Inventory
• Monitor mode—Select Device Management and click View Aruba Wireless Devices
• Fault mode—Select Device Management and click Impacted Aruba Wireless Devices

Procedure

1. Click the hostname entry under column Hostname in device inventory table.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The APs/Devices > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba access point.

3. You can manage the selected Aruba access point by using this page.

Procedure

1. Click the controller name entry in the column Controller Name in device inventory table.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The APs/Devices > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba wireless LAN controller.

3. You can manage the selected Aruba wireless LAN controller by using this page.

Procedure

1. Click the group name entry in the column Device Group in device inventory table.

   The Aruba Airwave application login page opens.

2. Type the credentials in the Aruba Airwave application login page.

   The Groups > Monitor page of the Aruba Airwave application opens, showing details of the selected Aruba wireless device group.

3. You can manage the selected device group by using this page.

Related Documentation

• Understanding the Build Mode Tasks Pane
• Understanding the Monitor Mode Tasks Pane
• Understanding the Fault Mode Tasks Pane
• Understanding the Report Mode Tasks Pane
• Understanding Aruba Airwave Integration with Network Director
• Viewing Aruba Wireless Device Inventory in Network Director
• Linking to the Aruba Airwave Application
• Network Director Documentation home page