Viewing the Configured LSP Services
To view and determine the status of LSP services in a tabular form:
- Select Service View from the View Selector. The workspaces that are applicable to routing and tunnel services are displayed.
- From the Junos Space user interface, click the Build icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
- From the View pane, click the plus sign (+) to expand the tree and select the type of service.
- In the Network Services > Tunnel task pane, select Service Provisioning > View LSPs.
The View LSP Services page is displayed with a table of services on the system appears in the bottom pane of the main display area. The following fields are displayed on this page:
Table 1 describes the fields in the View LSP Services table.
Table 1: Fields in the Services Table
Name of the service order assigned during service creation or edit.
Label-switched path (LSP)
State of the service:
Active—Denotes a service that has been deployed and is in an active state (enabled).
Inactive–Denotes a service that has been deployed and is in a deactivated state (disabled.
Pending—Denotes a service for which deployment of the service to a device is pending to be performed.
Failed—An attempt to modify the service failed.
Status of functional audit of the service.
Fault management status of the service.
Service-level agreement status of the service. If data exceeds the threshold value specified in the Threshold Alarm Profile, the system generates a threshold alarm. The value in the SLA Status column changes to SLA Violated. If the data does not cross the threshold value specified in the Threshold Alarm Profile, the value in the SLA Status column changes to SLA Violation Cleared.
Performance management status of the service.
Name of the service definition upon which the service order is based.
Date and time at which the service order was last activated.
Last Modified Time
Date and time at which the profile was last updated.
In the View pane, if you select the Tunnel item in the tree under Network Services, without expanding the tree and selecting a specific service type, such as RSVP LSPs, the top pane displays a set of five pie charts that enable you to view the different service orders configured, and their associated audit and monitoring statuses. The FA Status chart displays the functional audit status for the service orders. The Device State graph displays the statuses of devices on which services are being provisioned and commissioned. The Fault Status chart displays the connectivity fault management details for the service orders. The SLA Status chart displays the service-level agreement details for the service orders. The PM Status chart displays the performance management details for the service orders. The count or percentage of service orders in the pie chart segments sum up to the total number of configured service orders. Mouse over each segment of the pie to view the number corresponding to the percentage of service orders for each of the charts. These charts provide a visual overview of customers and service orders on your network, and enables you to quickly access related and commonly needed information. For example, you can check for failed service orders and then access a list of failed requests so you can begin to take restoration measure.
- To view details of a specific service, double-click the table row that summarizes the service.