Monitoring Port Traffic Statistics
This topic describes how to monitor port traffic statistics on a device. You can monitor port traffic statistics for a router, virtual router, or a security device.
This topic describes:
Procedure for Monitoring Port Traffic Statistics
- Click Monitor in the Connectivity Services Director banner.
- Select a node in the View pane that contains the port traffic you want to monitor.
- Select the Traffic tab.
- In the Tasks pane, select View > Port
The Port Traffic Stats window opens. For information about this window, click the Help button in the title bar of the window or see Port Traffic Stats Window.
Port on Device Window
Port on Device window displays the details of all the ports on devices that are configured for network traffic analysis. Table 1 describes the fields that are displayed in the Port on Device window.
Table 1: Port on Device table field descriptions
Identification of the port.
The administrative state of the port: enabled (UP) or disabled (DOWN).
The operational status—link up (UP) or link down (DOWN).
The actual bandwidth available on the port, in megabits (Mb).
The negotiated bandwidth based on the speed that is configured or auto-negotiated for the interface.
To view more details about the traffic on any port, select the port and click View Traffic. The Traffic on Port window opens.
Port Traffic Stats Window
The Port Traffic Stats window displays information about the port traffic on the node you selected in the View pane. It contains the following elements:
Port Traffic Trend graph—This line graph shows trends in the data and error rates on the port selected in the ports table below it. The horizontal axis shows the times when samples were taken. The vertical axis shows the data rate on the left side (in packets per second) and the error rate on the right side (in errors per second).
To display traffic for a different port, select the port from the table below the graph. To change the time period over which to display the traffic trends, select a time period from the list in the upper right corner.
After a device is discovered, trend data does not appear immediately—it appears only after three polling periods have elapsed.
To highlight a line on the graph, mouse over the line legend. To remove or restore a line, click the line legend. To see numeric values, mouse over where a data line intersects with a dotted vertical grid line.
Ports table (on the lower left side of the window)—This table provides information about the ports as described in Table 2. Selecting a port from this table updates the Port Traffic Trend graph to display traffic information about the selected port.
Counter selection table (on the lower right side of the window)—This table enables you to select which counters to display on the Port Traffic Trend graph. It includes separate tabs for packet counters and error counters. Select the check box in the Show column of each counter that you want to display on the graph. The Per/Sec column shows the rate per second of that row’s counter.
Table 2: Port Traffic Window
Serial number of the device to which the port belongs.
Port Usage Type
Port mode—either ACCESS or UPLINK.
Port MAC address.
Full duplex, half duplex, or unspecified.
Current rate of inbound packets.
Current rate of outbound packets.