Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Known Issues

 

This section lists the known issues in Connectivity Services Director Release 3.0R1. For the most complete and latest information about known Junos Space Connectivity Services Director defects, use the Juniper Networks online Problem Report Search application.

  • ACX5448 supports provisioning of only basic E-Line and LSP services on Junos OS Release 18.2.

    ACX5448 does not support provisioning of E-LAN and IP service types on Junos OS Release 18.2. [PR 1367398]

  • The fault status of an E-LAN BGP or E-LAN LDP service is not displayed correctly on the user Interface. [PR 1344103]

  • While creating an IP service, if you select more than one interface from the same device, the interfaces appear in the same row, separated by commas. [PR 1345660]

  • When you use an Interface Definition (IFD) template with a tag-based role to push configuration on a VLAN-based service and then later delete the VLAN-based service to create a service by using the same IFD template with the role changed to port-based, the service creation fails. [PR 1346264]

  • You are unable to delete an IP service that has at least one node configured with an Integrated Routing and Bridging (IRB) Interface. [PR 1347272]

  • The Fault status on the Manage Network Services page is unavailable for an E-LAN service with Transport vlan list as the traffic type. [PR 1350669]

  • If you delete the peer node of a device while editing the node settings of an E-LAN service order and later revert the changes, then the peer node is not displayed on the Edit E-LAN Service page. [PR 1366732]

  • When an EVPN service, with ESI and multihoming set to single-active or all-active, is recovered, the Service Details page does not list peer interfaces.

    Also, when the service is modified, the Node Settings and Site Settings pages of the Service do not show the mapping between interfaces of the peer nodes. [PR 1362288]

  • The fault status is unavailable on the Connectivity Services Director GUI for an E-LAN service with evpn or evpn e-tree as the protocol type, when an interface goes down. [PR 1355928]

  • While Connectivity Services Director Release 2.1, installed on Junos Space Platform Release 17.1R1, is upgraded to Connectivity Services Director Release 2.2, installed on Junos Space Platform Release 17.2R1 or Release 18.1R1, the upgrade job remains in the InProgress state and never completes. [PR 1345732]

    Workaround: A timeout is introduced in the CSD installation script.

    As a result, the upgrade of Connectivity Services Director, from Release 2.1 to Release 2.2, is completed. However, you must restart jboss by executing the following commands after the upgrade job is completed:

    Service jmp-watchdog stop

    Service jboss-dc stop

    Service jboss stop

    Service jmp-watchdog start