Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Stopping an RFC 2544-Based Benchmarking Test

    The RFC 2544 test is stopped at the initiator automatically after the test successfully completes all of the test steps. You need not explicitly stop the test. However, at the reflector, you must explicitly enter this command to stop the test after the test is completed at the initiator.

    After the test is successfully completed, it is automatically stopped at the initiator. By default, the RFC 2544-based benchmarking test ignores a prefix-down event (when the prefix associated with the test goes down) and continues to run. If you configure the halt-on-prefix parameter for an RFC 2544 test, a prefix that moves to the down state causes the corresponding tests to be stopped.

    To stop a configured RFC2544 test:

    1. From the View selector, select Device View.

      The workspaces that are applicable to this view are displayed.

    2. From the Junos Space user interface, click the Deploy icon on the Connectivity Services Director banner.

      The functionalities that you can configure in this mode are displayed in the task pane.

    3. From the View pane, click the plus sign (+) beside the My Network item in the View pane to expand the tree and select the device node you want for which you want to manage the RFC2544 test.

      The device type selected within the device model tree is highlighted.

    4. From the Tasks pane, select the OAM functionality that you want to configure. To manage an RFC2544 test for a device, select OAM > RFC2544 Test.

      The Manage RFC 2544 Tests page is displayed.

    5. Select the check box beside a previously configured RFC2544-based benchmarking test that you want to terminate.

      A confirmation dialog box is displayed prompting you to confirm whether you want to stop the test. Click OK to confirm.

    Tip: Apart from starting or stopping an RFC 2544-based test from Build mode of Device View for a particular device, you can also create, start, or stop an RFC 2544-based test from Monitor mode of Service View for a particular service configured on a device. To administer such tests for a service, select Service View from the View selector, click the Monitor icon on the Connectivity Services Director banner, and from the View pane, drill-down the Network Services > OAM > RFC2544 Tests tree. From the task pane, which is displayed on the rightmost pane, select Tasks > RFC2544 Test > Create Test.

    Modified: 2016-03-14