Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing the Highlighted LSPs by Using the Topology Map LSPs Shortcut Menu

    You can remove the highlighted LSPs from being displayed in the Topology View in network scenarios in which several LSPs are configured for a service to prevent the topology map from being cluttered with a large set of connector lines. You might require to specifically focus on some of the LSPs that you want to troubleshoot and diagnose for faults and traffic disruptions.

    Note: In the Topology View displayed in Build mode on the Connectivity Services Director GUI, mouse over an LSP and right-click to display a menu. When you mouse over an LSP, the name of the link is displayed as a tooltip.

    To remove the highlighted LSPs from display in the Topology View:

    1. From the Junos Space user interface, click the Build icon on the Connectivity Services Director banner.

      The workspaces that are applicable to Build mode are displayed on the Tasks pane.

    2. From the View selector, select Topology View.

      The topology map of the sites or zones and the devices configured in each zone using the CSD-Topology is displayed on the upper portion of the page. A table with details of devices, services, links, and LSPs is displayed on the lower portion of the page.

    3. Select the LSPs tab on the lower portion of the page.

      The configured LSP details are displayed in a table.

    4. Select the check boxes beside the LSPs that you want to view on the topology map.

      The selected LSPs are displayed as different color-coded lines on the map.

    5. Mouse over an LSP and right-click to display a menu.

      When you mouse over an LSP, the name of the link is displayed as a tooltip. The following option is available on the shortcut menu when you right-click each LSP:

      Remove LSP Highlight > LSPNameRemoves the selected LSPs displayed on the shortcut menu from being highlighted in the Topology View. This option is useful when a service is configured with multiple LSPs and you do not want the LSPs to be highlighted and shown.

    Modified: 2016-08-29