Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Known Issues

The following are the known issues in Connectivity Services Director Release 2.1R1. For each entry, the identifier in the PR Number column of Table 2 is the tracking number in the Juniper Networks problem report (PR) tracking system.

Table 2: Known Issues in Connectivity Services Director Release 2.1R1

PR Number

Problem Description

1244763

In the Topology view, the status of Layer 3 links are not dynamically updated.

Workaround: To update the status of the Layer 3 links you must perform a Refresh Topology job manually.

1258324

In the Topology view, optical inline amplifiers (ILAs) are displayed on optical links only after a delay of 15 seconds.

Workaround: None at present.

1257863

While modifying a Layer 3 VPN service if you select a device to associate a policy, the policy is listed only if you have associated the policy with a device at the time of policy creation.

Workaround: None at present.

1238027

If the AS number is greater than 65535, you must append Route Target or Route Distinguisher values with “L”. Connectivity Services Director fails to recover a service with such Route Target or Route Distinguisher values.

Workaround: None at present.

1241543

On the Create Service Definition page, the upper limit of MTU is limited to 9216.

Workaround: None at present.

1243315

A device you deleted while modifying a Layer 3 VPN service appears in the Create Policy page.

Workaround: None at present.

1247227

A generic error message is displayed if the deployment of a VPLS service with Traffic Type as Transport VLAN fails. The generic error message must be replaced with the following appropriate error message:

Specify CVLAN start and CVLAN end values.

Workaround: None at present.

1248119

While you are modifying a VPLS service, you cannot search on the Site Settings page for an endpoint that is not associated with the service.

Workaround: None at present.

1250579

If you modify the ASN value on a device, the new ASN value is not updated in the Connectivity Services Director application.

Workaround: None at present.

1255682

An Ethernet interface, which is a part of an aggregated Ethernet, is listed as user-to-network interface (UNI).

Workaround: None at present.

1259449

For a modified RSVP LSP service, the View Configuration Change page displays only the modified configuration instead of the displaying the entire configuration.

Workaround: To view the entire configuration, you must force-deploy the RSVP LSP service.

1255005

If a service template has multiple MD5 key-value rows with different default values and if you attach this service template to a Layer 3 VPN service, the Template Configuration page displays the same default value for each MD5 key-value row.

Workaround: While you are creating a service you can modify the default values for each MD5 key-value row.

1282178

You cannot modify a service without modifying at least one endpoint.

Workaround: From the Service Settings tab, modify the comment and UNI description of any of the endpoint and deploy the service.

1257293

In VPLS Service, you cannot search service by its description. This is because the Connectivity Services Director application does not support searching a service by service description. This problem is planned to be fixed in a future release.

Modified: 2017-08-04