Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing a Graphical Image of the Chassis of PTX Series Routers

    In the Connectivity Services Director GUI, you can view a graphical representation of a device from Build mode of Device View by selecting the Device Management > View Physical Inventory option from the Tasks pane. The hardware and line module details are displayed with a pictorial view of the slots of the PTX Series routers and the modules installed in these slots. The Chassis View provides a pictorial representation of the chassis or device, and the modules or components that are installed in it, such as the line cards, interfaces, and other hardware elements.

    To view a pictorial representation of a device chassis and the configured components, such as interfaces, line cards, and hardware elements, select a managed device listed on the My Network tree in Device View of Connectivity Services Director, and select Device Management > View Physical Inventory from the tasks pane. The right pane displays the device image and the corresponding description of the view selected in a tabular manner. The Chassis View is displayed. The hardware and line module details are displayed with a pictorial view of the slots of the devices and the modules installed in these slots. The device image can be rotated to view the front, rear, top, bottom, right and left planes of the device by clicking the respective arrow buttons on the page.

    To view a graphical image of the chassis and its associated components:

    1. From the Junos Space user interface, click the Build icon on the Connectivity Services Director banner.

      The workspaces that are applicable to Build mode are displayed on the Tasks pane.

    2. From the View selector, select Device View.

      The functionalities that you can configure in this view are displayed.

    3. From the Device View pane, click the plus sign (+) next to the My Network tree to expand the tree and select the device for which you want to define the optical port settings.

      The network tree is expanded and the selected device is highlighted.

    4. From the Tasks pane, select Device Management > View Physical Inventory.

      An image of the device is displayed on the right pane as shown in Figure 1.

      Figure 1: Chassis View of a PTX Series Router

      Chassis View of a PTX Series
Router
    5. Click a particular component or interface to display the associated details in the lower portion of the page. The Rotate and Perspective buttons enable you to view the images images in required orientation.
    6. Click the View Back (arrows in a square symbol) icon to cause the device image to rotate along the x-axis and display the rear view of the device. Alternatively, click the View Front icon to view the front plane of the device. The View Back and View Front icons are toggle options.
    7. Click the Perspective (cube symbol) icon to display the device image in three-dimensional format. It is a toggle button, which causes the device image to be shown in either three-dimensional or one-dimensional format.
    8. Select the level of magnification of the image by clicking the Zoom (magnifying glass) icon. The image is expanded and displayed.

      Alternatively, use the slider control beneath the Zoom icon to change the level of magnification.

    9. Click the home icon to return to the front view of the chassis. The selected interface is surrounded with a colored outline based on the operational status. An interface that is operationally up is denoted in green and an interface that is operationally down is represented in red. The components are depicted as small colored icons at the top-left corner of the front view of the equipment image.

    In the graphical image of the device displayed, you can mouse over the different parts of the device, such as the interfaces, line cards, and slots. When you mouse over the different modules, their corresponding details are displayed as tooltips. On clicking the device components, the corresponding description for the selected component is displayed by default in the Component Info pane and the Equipment tab with the following values.

    • Description—Brief description of the hardware item:

      • Type of power supply.

      • Type of PIC. If the PIC type is not supported on the current software release, the output states Hardware Not Supported.

      • Type of FPC: FPC Type 1, FPC Type 2, FPC Type 3, FPC Type 4 , or FPC TypeOC192.

        On EX Series switches, a brief description of the FPC.

        On the J Series routers, the FPC type corresponds to the Physical Interface Module (PIM). The following list shows the PIM abbreviation in the output and the corresponding PIM name.

        • 2x FE—Either two built-in Fast Ethernet interfaces (fixed PIM) or dual-port Fast Ethernet PIM

        • 4x FE—4-port Fast Ethernet ePIM

        • 1x GE Copper—Copper Gigabit Ethernet ePIM (one 10-Mbps, 100-Mbps, or 1000-Mbps port)

        • 1x GE SFP—SFP Gigabit Ethernet ePIM (one fiber port)

        • 4x GE Base PIC—Four built-in Gigabit Ethernet ports on a J4350 or J6350 chassis (fixed PIM)

        • 2x Serial—Dual-port serial PIM

        • 2x T1—Dual-port T1 PIM

        • 2x E1—Dual-port E1 PIM

        • 2x CT1E1—Dual-port channelized T1/E1 PIM

        • 1x T3—T3 PIM (one port)

        • 1x E3—E3 PIM (one port)

        • 4x BRI S/T—4-port ISDN BRI S/T PIM

        • 4x BRI U—4-port ISDN BRI U PIM

        • 1x ADSL Annex A—ADSL 2/2+ Annex A PIM (one port, for POTS)

        • 1x ADSL Annex B—ADSL 2/2+ Annex B PIM (one port, for ISDN)

        • 2x SHDSL (ATM)—G SHDSL PIM (2-port two-wire module or 1-port four-wire module)

        • 1x TGM550—TGM550 Telephony Gateway Module (Avaya VoIP gateway module with one console port, two analog LINE ports, and two analog TRUNK ports)

        • 1x DS1 TIM510—TIM510 E1/T1 Telephony Interface Module (Avaya VoIP media module with one E1 or T1 trunk termination port and ISDN PRI backup)

        • 4x FXS, 4xFX0, TIM514—TIM514 Analog Telephony Interface Module (Avaya VoIP media module with four analog LINE ports and four analog TRUNK ports)

        • 4x BRI TIM521—TIM521 BRI Telephony Interface Module (Avaya VoIP media module with four ISDN BRI ports)

        • Crypto Accelerator Module—For enhanced performance of cryptographic algorithms used in IP Security (IPsec) services

      • MPC M 16x 10GE—16-port 10-Gigabit Module Port Concentrator that supports SFP+ optical transceivers. (Not on EX Series switches.)

      • For hosts, the Routing Engine type.

      • For small form-factor pluggable transceiver (SFP) modules, the type of fiber: LX, SX, LH, or T.

      • LCD description for EX Series switches (except EX2200 switches).

      • MPC2—1-port MPC2 that supports two separate slots for MICs.

      • MPC3E—1-port MPC3E that supports two separate slots for MICs (MIC-3D-1X100GE-CFP and MIC-3D-20GE-SFP) on MX960, MX480, and MX240 routers. The MPC3E maps one MIC to one PIC (1 MIC, 1 PIC), which differs from the mapping of legacy MPCs.

      • 100GBASE-LR4, pluggable CFP optics

      • Supports the Enhanced MX Switch Control Board with fabric redundancy and existing SCBs without fabric redundancy.

      • Interoperates with existing MX Series line cards, including Flexible Port Concentrators (FPC), Dense Port Concentrators (DPCs), and Modular Port Concentrators (MPCs).

      • MPC4E—Fixed configuration MPC4E that is available in two flavors: MPC4E-3D-32XGE-SFPP and MPC4E-3D-2CGE-8XGE on MX2020, MX960, MX480, and MX240 routers.

      • LCD description for MX Series routers

    • Model—Model number of the FRU component.

    • Name—Name of the SDG and the platform type, such as MX240 or MX480. This field displays the components of the device, such as chassis, PIC, CPU, and PIC parameters. Information about the chassis, midplane, craft interface (FPM), power midplane (PMP), Power Supply Modules (PSMs), Power Distribution Modules (PDMs), Routing Engines, Control Boards (CBs) and Switch Processor Mezzanine Boards (SPMBs), Switch Fabric Boards (SFBs), Flexible PIC Concentrators (FPCs), PICs, adapter cards (ADCs) and fan trays is displayed.

    • Manufacturer—Name of the company that built and shipped the device.

    • Part number—Part number of the chassis component.

    • Serial number—Serial number of the chassis component. The serial number of the backplane is also the serial number of the router or switch chassis. Use this serial number when you need to contact Juniper Networks Customer Support about the router or switch chassis.

    The Active Alarms monitor shows any active alarm that has not yet been cleared. It is one of the four standard monitors available in Alarm mode. Active Alarms is a table that has four fields and appear by default. However, nine fields are available for selection. View Table 1 for a description of the table.

    Table 1: Active Alarms Monitor

    ID

    A system and sequentially-generated identification number.

    No

    No

    Assigned To

    If assigned to an individual, it shows the name of the person assigned; otherwise, it shows System to mark that the alarm is still unassigned.

    No

    Yes

    Severity

    The severity of the alarm. Severity levels are:

    • Critical—A critical condition exists; immediate action is necessary.

    • Major—A major error has occurred; escalate or notify as necessary.

    • Minor—A minor error has occurred; notify or monitor the condition.

    • Info—An informational message; no action is necessary.

    Yes

    Yes

    Entity ID

    The identification of the entity responsible for causing this alarm. The Entity ID is the key for correlation of events into an alarm. The Entity ID could be a MAC address of a radio or an IP address of the device.

    Yes

    Yes

    Source

    The IP address of the device or network element that generated the alarm. The SNMP agent is located at the source IP. In most cases, the source IP is the IP address of the switch or controller.

    No

    No

    Reporting Device

    The hostname or IP address of the reporting device.

    Yes

    Yes

    Creation Date

    The date and time the alarm was first reported.

    No

    No

    Last Updated

    The date and time that the information for the alarm was last modified.

    Yes

    Yes

    Updated By

    Either the system or the last user who modified the alarm.

    No

    No

    Modified: 2016-04-29