Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Junos Space
- Customer Workspace Navigation in the Cloud CPE Selfcare Application for MX Series Routers
- Understanding Administrative Tasks in the Customer Workspace
- Understanding How Stateless Firewall Filters Control Traffic on Site Access Links
- Additional Information
- NAT cCPE Services Overview
- Configuring NAT cCPE Services to Assign Primary IP Addresses
Configuring a Static Route for Internet-Bound Traffic
You can use a static route to forward Internet-bound traffic to the private address of your NAT device. The NAT device translates between private and public IP addresses. The static route is propagated to all VPN sites through a routing protocol, such as Border Gateway Protocol (BGP).
To configure a static route for forwarding Internet-bound traffic to your NAT device:
- In the Selfcare Portal task pane, select Administration > Site Configuration.
- From the Site selection list, select the site for which you want to configure the static route.
- Select the Routing Configuration tab.
The Routing Configuration page is displayed.
- Create a new static route:
- From the Routes list, select the Add (+) icon.
The Add Route Destination Prefix dialog box is displayed.
- Specify the IP address in the Add Route Destination
Prefix dialog box.
Note: You must specify the route in Classless Interdomain Routing (CIDR) format.
- Select the Add button.
The new route appears in the Routes list.
- From the Next Hops group box, select the Add
(+) icon.
A new row is added to the Next Hops group box.
- Select the newly added row and specify the IP address of the next hop for the route.
- From the Routes list, select the Add (+) icon.
- (Optional) Modify an existing static route:
- From the Routes list, select the route you
want to modify.
The Next Hops group box is updated with a list of next hop IP addresses.
- Select either the Add (+) or Delete (-) icon in the Next Hops group box and make your configuration changes.
- From the Routes list, select the route you
want to modify.
- (Optional) Delete an existing static route:
- From the Routes list, select the route you want to delete.
- Select the Delete (-) icon next to the Routes list.
- Select Update to save your changes.
Related Documentation
- Junos Space
- Customer Workspace Navigation in the Cloud CPE Selfcare Application for MX Series Routers
- Understanding Administrative Tasks in the Customer Workspace
- Understanding How Stateless Firewall Filters Control Traffic on Site Access Links
- Additional Information
- NAT cCPE Services Overview
- Configuring NAT cCPE Services to Assign Primary IP Addresses
