Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Performing a Functional Audit

    The Functional Audit task enables you to verify the connectivity between different cCPE customer sites. A functional audit verifies that a site is reachable by sending a series of pings from the source site’s access links to the destination site’s access links. You can select multiple sites for both the source and destination sites. The destination site does not send any pings. A site cannot ping itself, and the functional audit cannot be used if a customer has only one site.

    Both service providers and their cCPE customers can use the procedure that follows. Certain steps apply only to service providers.

    To perform a functional audit:

    1. (Service providers only) In the Applications field of the Junos Space Network Management Platform, select Selfcare Portal.
    2. Select the Monitoring task group..
    3. Select the Functional Audit sub task.

      The Functional Audit page is displayed.

    4. (Service providers only) Select the desired customer from the Customer selection field.
    5. Select the origin site from the Origin Site Selection field.
    6. Select the Destination site from the Destination Site Selection field.
    7. Select Schedule to schedule the job.
    8. To view the results, select View.

    Modified: 2015-11-04