Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Configuring SNMP to Monitor cCPE Sites Using the Selfcare Portal

    You can monitor your cCPE site using SNMP. The cCPE Selfcare portal provides ready-only access to site information.

    Note: To monitor your cCPE site using SNMP, your service provider must preconfigure the SNMP view on the PE router associated with your site and configure SNMP under the Administration > Application task group in the Junos Space Network Management Platform. See SNMP Monitoring for cCPE Services Overview.

    To monitor your site using SNMP:

    1. From the main page of the Selfcare portal, select Administration > Site Configuration > Service Management.

      The Service Management SNMP page is displayed, as shown in Figure 1.

      Figure 1: Service Management SNMP Page

      Service Management SNMP Page
    2. Select the site for which you want to configure SNMP read-only access from the Site selection field.
    3. Select the Community name defined by your service provider from the Community field. The default name is “ccperead.”
    4. To add a private IP address to the list of allowed clients, select the Add icon and specify the private IP address of the client.
    5. To delete a private IP address from the list of allowed clients, select the IP address and then select the Delete icon.
    6. Select Update to save your changes to the database.

    Related Documentation


    Modified: 2015-11-04