Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Configuring Private IP Networks on Access Links

    This procedure describes how to configure private IP addresses for your networks associated with the access link on your service provider’s PE router. Configuring an IP private address on the access link inserts it into the local routing protocol, for example BGP, running in the routing instance defined for the access link on the PE router. This ensures routes to the private network are propagated to all the other cCPE routing instances in the VPN so other sites can reach the site behind the access link where the private addresses are configured.

    To configure private IP addresses on the access link:

    1. From the main page of the Selfcare portal, select Administration > Site Configuration > Access Links.
    2. Select the site for which you want to configure private addresses from the Site selection field.
    3. Select the Private Address Management tab.

      The Private Address Management page is displayed, as shown in Figure 1.

      Figure 1: Private Address Management Page

      Private Address Management Page
    4. To add a private address using Classless Inter-Domain Routing (CIDR) notation, select the Add icon .
    5. To delete an IP address, select the IP address and then select the Delete icon .
    6. Select Update to save your changes.
     

    Related Documentation

     

    Modified: 2015-11-04