Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring a Static Route for Internet-Bound Traffic
You can use a static route to forward Internet-bound traffic to the private address of your NAT device. The NAT device translates between private and public IP addresses. The static route is propagated to all VPN sites through a routing protocol, such as Border Gateway Protocol (BGP).
To configure a static route for forwarding Internet-bound traffic to your NAT device:
- From the main page of the Selfcare portal, select Administration > Site Configuration.
- From the Site selection field, select the site for which you want to configure the static route.
- Select the Routing Configuration tab.
- From the Routes field, select an existing network prefix or add a new one by selecting the Add icon and entering the new network prefix in the New Route Destination Prefix field.
- Specify the next hop by entering the IP address of the target router in the Next Hop field.
- Select Update to add the changes to the database.
