The user interface for this application consists simply of the
Each command behaves as follows:
set command is understood by the system with no programming on your part
show command is specific to the application; you must create hooks in your code that access the configuration database (in this simple case, to read messages entered by the user and stored in the configuration.)
quit command is issued internally when the user restarts the router, but is never directly entered by the user.
Creating the Commands Menu Array
- Your applications do not need to declare or define functions for
version if you specify the
norestart tags when you set up the daemon table XML file. For more information on the daemon table, see Updating System Tables to Describe Your Application.
© 2007-2009 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Generated on Sun May 30 20:26:47 2010 for Juniper Networks Partner Solution Development Platform JUNOS SDK 10.2R1 by Doxygen 1.4.5